SFS-EN 1993-1-4:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This Part 1.4 of EN 1993 gives supplementary provisions for the design of buildings and civil engineering works that extend and modify the application of EN 1993 1 1, EN 1993 1 3, EN 1993-1-5 and EN 1993-1-8 to austenitic, austenitic-ferritic and ferritic stainless steels.

NOTE 1: Information on the durability of stainless steels is given in Annex A.

NOTE 2: The execution of stainless steel structures is covered in EN 1090.

NOTE 3: Guidelines for further treatment, including heat treatment, are given in EN 10088.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

91.080.10 Metallirakenteet »
92.093 Teräsrakenteiden suunnittelu »
91.080.13 Teräsrakenteet »
91.010.30 Tekniset näkökohdat »

Sidokset

Velvoittavat viittaukset

EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 10088-1:2023 Stainless steels - Part 1: List of stainless steels

EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 10088-1:2023 Stainless steels - Part 1: List of stainless steels
EN 10088-2:2014 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-3:2023 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes
EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10088-5:2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 10219-2:2019 Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
EN 1090-2:2018 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1:2024 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1990:2002 Eurocode - Basis of structural design
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-12:2007 Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-1-1:2005 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-2:2005 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
EN 1993-1-2:2024 Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1993-1-3:2006 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-1-3:2024 Eurocode 3 - Design of steel structures - Part 1-3: Cold-formed members and sheeting
EN 1993-1-5:2006 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2024 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-8:2005 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-8:2024 Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1993-1-9:2005 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 508-3:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 508-3:2021 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 508-3:2021+A1 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 508-3:2021+A1:2023 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN ISO 3506-1:2020 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)
EN ISO 3506-2:2020 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)
EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2018)
EN ISO 7089:2000 Plain washers - Normal series - Product grade A (ISO 7089:2000)
EN ISO 7090:2000 Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)
EN ISO 9445-1:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
EN ISO 9445-2:2010 Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)

Tekninen komitea

CEN/TC 250/SC 3 Eurocode 3 - Design of steel structures »

Direktiivi

89/106/EEC Rakennustuotedirektiivi
305/2011 Rakennustuotteet

http://ec.europa.eu »

Vahvistuspäivä

18.12.2006

Julkaisupäivä

12.01.2007

Painos

1

Sivumäärä

36

Julkaisun kieli

englanti

Lisätiedot

Tämä on nk. ensimmäisen sukupolven eurokoodi, joka on edelleen käytössä Suomessa, kunnes toisen sukupolven eurokoodit otetaan käyttöön. Lisätietoja eurokoodeista www.eurocodes.fi.