ASME BPVC.CC.BPV-2023 standardi SFS verkkokaupasta

Soveltamisala

1.1 Soveltamisala
(1) Standardin EN 1993 tässä osassa esitetään pääasiassa staattisesti kuormitettujen liitosten mitoitusmenetelmiä, kun teräslaji on S235, S275, S355 tai S460. 1) 1) Suomentajan huomautus: SFS-EN 1993-1-8 koskee myös teräslajeja S420 ja S450 ellei toisin mainita.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

91.080.10 Metallirakenteet »
92.093 Teräsrakenteiden suunnittelu »
91.080.13 Teräsrakenteet »
91.010.30 Tekniset näkökohdat »

Sidokset

Velvoittavat viittaukset

EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-2:2004 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-2:2004 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10025-6:2004 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10029:1991 Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass
EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions
EN 10051:1991 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10056-1:1998 Structural steel equal and unequal leg angles - Part 1: Dimensions
EN 10056-2:1993 Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 10210-1:1994 Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements
EN 10210-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties
EN 10219-1:1997 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements
EN 10219-2:1997 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
EN 1090-2:2018 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-2:2018+A1:2024 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 12345:1998 Welding - Multilingual terms for welded joints with illustrations
EN 14399-1:2005 High-strength structural bolting assemblies for preloading - Part 1: General requirements
EN 14399-2:2005 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading
EN 14399-3:2005 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
EN 14399-4:2005 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
EN 14399-5:2005 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
EN 14399-6:2005 High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
EN 20898-2:1993 Mechanical properties of fasteners - Part 2: Nuts with specified proof load values - Coarse thread (ISO 898-2:1992)
EN 288-3:1992 Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels
EN ISO 10511:1997 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:1997)
EN ISO 10512:1997 Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:1997)
EN ISO 10513:1997 Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:1997)
EN ISO 13918:1998 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998)
EN ISO 14555:1998 Welding - Arc stud welding of metallic materials (ISO 14555:1998)
EN ISO 2320:1997 Prevailing torque type steel hexagon nuts - Mechanical and performance requirements (ISO 2320:1997)
EN ISO 4014:2000 Hexagon head bolts - Product grades A and B (ISO 4014:1999)
EN ISO 4016:2000 Hexagon head bolts - Product grade C (ISO 4016:1999)
EN ISO 4017:2000 Hexagon head screws - Product grades A and B (ISO 4017:1999)
EN ISO 4018:2000 Hexagon head screws - Product grade C (ISO 4018:1999)
EN ISO 4032:2000 Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999)
EN ISO 4033:2000 Hexagon nuts, style 2 - Product grades A and B (ISO 4033:1999)
EN ISO 4034:2000 Hexagon nuts - Product grade C (ISO 4034:1999)
EN ISO 5817:2003 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003)
EN ISO 7040:1997 Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997)
EN ISO 7042:1997 Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12 (ISO 7042:1997)
EN ISO 7089:2000 Plain washers - Normal series - Product grade A (ISO 7089:2000)
EN ISO 7090:2000 Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)
EN ISO 7091:2000 Plain washers - Normal series - Product grade C (ISO 7091:2000)
EN ISO 7719:1997 Prevailing torque type all-metal hexagon nuts, style 1 - Property classes 5, 8 and 10 (ISO 7719:1997)
EN ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999)
ISO 1891:1979 Bolts, screws, nuts and accessories -- Terminology and nomenclature
ISO 286-2:1988 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

Tekninen komitea

CEN/TC 250/SC 3 Eurocode 3 - Design of steel structures »

Direktiivi

89/106/EEC Rakennustuotedirektiivi
305/2011 Rakennustuotteet

http://ec.europa.eu »

Vahvistuspäivä

15.08.2005

Julkaisupäivä

03.11.2006

Painos

1

Sivumäärä

149

Julkaisun kieli

suomi

Lisätiedot

Tämä on nk. ensimmäisen sukupolven eurokoodi, joka on edelleen käytössä Suomessa, kunnes toisen sukupolven eurokoodit otetaan käyttöön. Lisätietoja eurokoodeista www.eurocodes.fi.