(1) EN 1997-1 is intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works. (2) The following subjects are dealt with in EN 1997-1: Section 1: General Section 2: Basis of geotechnical design Section 3: Geotechnical data Section 4: Supervision of construction, monitoring and maintenance Section 5: Fill, dewatering, ground improvement and reinforcement Section 6: Spread foundations Section 7: Pile foundations Section 8: Anchorages Section 9: Retaining structures Section 10: Hydraulic failure Section 11: Overall stability Section 12: Embankments (3) EN 1997-1 is accompanied by Annexes A to J, which provide: - in A: recommended partial safety factor values; different values of the partial factors may be set by the National annex; - in B to J: supplementary informative guidance such as internationally applied calculation methods.
Tämän julkaisun valmistelusta Suomessa vastaa Väylä, puh. 0295 343000 (vaihde).
EN 12063:1999 Execution of special geotechnical work - Sheet-pile walls
EN 12699:2000 Execution of special geotechnical work - Displacement piles
EN 1536:1999 Execution of special geotechnical work - Bored piles
EN 12063:1999 Execution of special geotechnical work - Sheet-pile walls
EN 12699:2000 Execution of special geotechnical work - Displacement piles
EN 1536:1999 Execution of special geotechnical work - Bored piles
EN 1537:1999 Execution of special geotechnical work - Ground anchors
EN 1990:2002 Eurocode - Basis of structural design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2003 Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1992-1-2:2004 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
EN 1992-2:2005 Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules
EN 1992-3:2006 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-1:2022 Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-4:2006 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-5:2006 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-7:2007 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
EN 1993-1-9:2005 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1994-1-1:2004 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
EN 1994-1-2:2005 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
EN 1995-1-1:2004 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-2:2004 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
EN 1995-2:2004 Eurocode 5: Design of timber structures - Part 2: Bridges
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-1:2022 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-2:2005 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-2:2006 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 1996-3:2006 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1998-1:2004 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
EN 1998-2:2005 Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-4:2006 Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
EN 1998-5:2004 Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects
EN 1998-6:2005 Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys
EN ISO 13793:2001 Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001)
ENV 1997-2:1999 Eurocode 7: Geotechnical design - Part 2: Design assisted by laboratory testing
ENV 1999-1-1:1998 Eurocode 9: Design of aluminium structures - Part 1-1: General rules - General rules and rules for buildings
ENV 1999-1-2:1998 Eurocode 9: Design of aluminium structures - Part 1-2: General rules - Structural fire design
ENV 1999-2:1998 Eurocode 9: Design of aluminium structures - Part 2: Structures susceptible to fatigue
Tätä versiota standardista voidaan käyttää 2028-03-30 saakka.
Tämä on nk. ensimmäisen sukupolven eurokoodi, joka on edelleen käytössä Suomessa, kunnes toisen sukupolven eurokoodit otetaan käyttöön. Lisätietoja eurokoodeista www.eurocodes.fi.