SFS-EN 10217-7:2021:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document specifies the technical delivery conditions in two test categories for welded tubes of circular cross-section made of austenitic and austenitic-ferritic stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.
NOTE Once the reference of this document is published in the Official Journal of the European Union (OJEU) under Directive 2014/68/EU, pressure equipment directive, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 2014/68/EU is limited to technical data of materials in this document and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer of the pressure equipment, taking also into account the subsequent manufacturing processes which could affect properties of the base materials.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Tuoteryhmä(t)

23.040.10 Rauta- ja teräsputket »
77.140.75 Teräsputket erikoiskäyttöön »

Sidokset

Velvoittavat viittaukset

CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
EN 10021:2006 General technical delivery conditions for steel products

CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
EN 10021:2006 General technical delivery conditions for steel products
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 10204:2004 Metallic products - Types of inspection documents
EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN ISO 10893-10:2011 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
EN ISO 10893-10:2011/A1:2020 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
EN ISO 10893-11:2011/A1:2020 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
EN ISO 10893-1:2011 Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011)
EN ISO 10893-1:2011/A1:2020 Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
EN ISO 10893-2:2011/A1:2020 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
EN ISO 10893-6:2019 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
EN ISO 10893-7:2019 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
EN ISO 10893-8:2011/A1:2020 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011)
EN ISO 10893-9:2011/A1:2020 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
EN ISO 1127:1996 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN ISO 2566-2:1999 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
EN ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998)
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2018)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
EN ISO 8492:2013 Metallic materials - Tube - Flattening test (ISO 8492:2013)
EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
EN ISO 8495:2013 Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)
EN ISO 8496:2013 Metallic materials - Tube - Ring tensile test (ISO 8496:2013)
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
ISO 11484:2019 Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel

Tekninen komitea

CEN/TC 459/SC 10 Steel tubes, and iron and steel fittings »

Direktiivi

2014/68/EU

http://ec.europa.eu »

Vahvistuspäivä

30.04.2021

Julkaisupäivä

04.05.2021

Painos

3

Sivumäärä

43

Julkaisun kieli

englanti