This European Standard specifies requirements and test methods for marketed and delivered unleaded petrol. It is applicable to unleaded petrol for use in petrol engine vehicles designed to run on unleaded petrol. This European Standard specifies two types of unleaded petrol: one type with a maximum oxygen content of 3,7 % (m/m) and a maximum ethanol content of 10,0 % (V/V) in Table 1, and one type intended for older vehicles that are not warranted to use unleaded petrol with a high biofuel content, with a maximum oxygen content of 2,7 % (m/m) and a maximum ethanol content of 5,0 % (V/V) in Table 2. NOTE 1 The two types are based on European Directive requirements [3], [4], ![11]". NOTE 2 For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, f.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
EN 12177:1998 Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography
EN 13016-1:2007 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
EN 13132:2000 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
EN 12177:1998 Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography
EN 13016-1:2007 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
EN 13132:2000 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
EN 14275:2013 Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
EN 15376:2014 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
EN 15553:2007 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
EN 1601:2014 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
EN 16135:2011 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
EN 16942:2016 Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
EN 238:1996 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
EN 238:1996/A1:2003 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
EN ISO 20846:2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011)
EN ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
EN ISO 22854:2016 Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2016)
EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
EN ISO 3405:2011 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011)
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 4259:2006 Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)
EN ISO 5163:2014 Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014)
EN ISO 5164:2014 Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014)
EN ISO 6246:2017 Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017)
EN ISO 7536:1996 Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994)