Heating boilers. Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
1.1 General This European Standard applies to heating boilers including safety devices up to a nominal heat output of 500 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer. This European Standard deals with significant hazards, hazardous situations and events relevant to heating boilers used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The boilers may operate under natural draught or forced draught. The stoking may work manually or automatically. NOTE This European Standard deals with boilers which are both within and outside of the scope of the Machinery Directive 2006/42/EC. This European Standard contains requirements and test methods for safety, combustion quality, operating characteristics, marking and maintenance of heating boilers. It also covers all external equipment that influences the safety systems (e.g. back burning safety device, integral fuel hopper). This European Standard covers only boilers that include burners as a unit. The standard applies to the combination of a boiler body with a solid fuel burner according to EN 15270 as a unit only when the whole unit is tested in accordance with this European Standard. Heating boilers in accordance with this European Standard are designed for central heating installations where the heat carrier is water and the maximum allowable temperature is 110 °C, and which can operate at a maximum allowable operating pressure of 6 bars. For heating boilers with a built-in or attached water heater (storage or continuous flow heater), this European Standard only applies to those parts of the water heater which are necessarily subject to the operating conditions of the heating boiler (heating part). This European Standard does not apply to: - heating boilers and other heating appliances which are also designed for the direct heating of the place of installation; - cooking appliances; - the design and construction of external fuel storage and transportation devices prior to the safety devices of the boiler; - room sealed applications; - condensing boilers. This European Standard specifies the necessary terminology for solid fuel heating boilers, the control and safety related requirements, the design requirements, the technical heating requirements (taking into account the environmental requirements) and testing, as well as the marking requirements. This European Standard is not applicable to heating boilers which are tested before the date of its publication as an EN (European Standard). (...)
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10088-2:2014 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10120:2017 Steel sheet and strip for welded gas cylinders
EN 10204:2004 Metallic products - Types of inspection documents
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 13384-1:2002 Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : Chimneys serving one appliance
EN 13384-1:2002+A2:2008 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
EN 14961-1:2010 Solid biofuels - Fuel specifications and classes - Part 1: General requirements
EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
EN 15456:2008 Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements
EN 1561:2011 Founding - Grey cast irons
EN 1563:2018 Founding - Spheroidal graphite cast irons
EN 303-1:1999 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
EN 303-1:1999/A1:2003 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
EN 304:1992 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 304:1992/A1:1998 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 304:1992/A2:2003 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 60335-1:1988 Safety of household and similar electrical appliances - Part 1: General requirements
EN 60335-1:1994 Sähkökäyttöisten koti- ja vastaavaan käyttöön tarkoitettujen laitteiden turvallisuus. Osa 1: Yleiset vaatimukset
EN 60335-1:2002 Kotitaloussähkölaitteiden ja vastaavien turvallisuus. Osa 1: Yleiset vaatimukset
EN 60335-1:2012 Kotitalouksiin ja vastaaviin käyttöihin tarkoitetut sähkölaitteet. Turvallisuus. Osa 1: Yleiset vaatimukset
EN 60335-2-102:2006 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN IEC 61000-6-2:2019 Sähkömagneettinen yhteensopivuus (EMC). Osa 6-2: Yleiset standardit. Häiriönsieto teollisuusympäristöissä
EN IEC 61000-6-3:2021 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 17225-2:2014 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2014)
EN ISO 17225-3:2014 Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO 17225-3:2014)
EN ISO 17225-3:2021 Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO 17225-3:2021)
EN ISO 17225-4:2014 Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO 17225-4:2014)
EN ISO 17225-4:2021 Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO 17225-4:2021)
EN ISO 17225-5:2014 Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2014)
EN ISO 17225-6:2014 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2014)
EN ISO 18135:2017 Solid Biofuels - Sampling (ISO 18135:2017)
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
ISO 7-2:2000 Pipe threads where pressure-tight joints are made on the threads -- Part 2: Verification by means of limit gauges
ISO 7005-1:2011 Pipe flanges -- Part 1: Steel flanges for industrial and general service piping systems
ISO 7005-2:1988 Metallic flanges -- Part 2: Cast iron flanges
ISO 7005-3:1988 Metallic flanges -- Part 3: Copper alloy and composite flanges
ISO 857-1:1998 Welding and allied processes -- Vocabulary -- Part 1: Metal welding processes
ISO 857-2:2005 Welding and allied processes -- Vocabulary -- Part 2: Soldering and brazing processes and related terms