SFS-EN 485-1:2016

Soveltamisala

Tämä eurooppalainen standardi määrittelee yleisiin käyttötarkoituksiin tarkoitettujen muokattujen alumiini- ja alumiiniseoslevyjen ja -nauhojen yleiset tekniset toimitusehdot. Standardissa esitetään myös tilausta ja testausta koskevat vaatimukset.
Standardi koskee tuotteita, joiden paksuus on yli 0,20 mm ja enintään 400 mm.
Useille alumiininauhojen ja -levyjen erikoissovelluksille on omat eurooppalaiset standardinsa, joissa on esitetty poikkeavia vaatimuksia tai lisävaatimuksia ja joihin on valittu soveltuvat seokset ja tilat, ks. liite A. Useimmat näistä erikoissovellusten eurooppalaisista standardeista viittaavat vaatimusten osalta tähän standardiin.
Asianmukaisen eurooppalaisen standardin valinta on ostajan vastuulla.
Mikäli sovellukseen liittyy erityisiä ominaisuusvaatimuksia, kuten korroosionkestävyys, sitkeys, väsymislujuus, pinnan ulkonäkö, pinnanlaatu ja hitsattavuus, käyttäjän olisi neuvoteltava toimittajan kanssa ja harkittava asianmukaisen eurooppalaisen standardin soveltamista.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Sisällysluettelo

Tuoteryhmä(t)

77.150.10 Alumiinituotteet »

Sidokset

Velvoittavat viittaukset

ASTM G 34:2001 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G 47:1998 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G 66:1999 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)

ASTM G 34:2001 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G 47:1998 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G 66:1999 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM G 67:2013 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
EN 10204:2004 Metallic products - Types of inspection documents
EN 12258-1:2012 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
EN 12392:2016 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
EN 12392:2016+A1:2022 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
EN 12482-1:1998 Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock
EN 12482-2:1998 Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock
EN 13195:2013 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
EN 1386:2007 Aluminium and aluminium alloys - Tread plate - Specifications
EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 1396:2023 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 13981-2:2004 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets
EN 14121:2009 Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications
EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
EN 14242:2023 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
EN 14286:2008 Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods
EN 14287:2004 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
EN 14361:2004 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
EN 14392:2007 Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff
EN 15088:2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
EN 1669:1996 Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip
EN 2004-1:1993 Aerospace series - Test methods for aluminium and aluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys
EN 485-2:2016+A1:2018 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
EN 485-3:2003 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
EN 485-4:1993 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations
EN 541:2006 Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications
EN 573-3:2019 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019+A1:2022 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-3:2019+A2:2023 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 602:2004 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
EN 603-1:1996 Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery
EN 603-2:1996 Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties
EN 603-3:2000 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
EN 603-3:2021 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
EN 683-1:2006 Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery
EN 851:2014 Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
EN 851:2022 Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
EN 941:2014 Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications
EN 941:2022 Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications
EN ISO 20482:2013 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
ISO 9591:2004 Corrosion of aluminium alloys -- Determination of resistance to stress corrosion cracking

Tekninen komitea

CEN/TC 132 Aluminium and aluminium alloys »

Vahvistuspäivä

05.08.2016

Julkaisupäivä

27.09.2016

Painos

4

Sivumäärä

37

Julkaisun kieli

suomi/englanti