CEN/TS 19100-1:2021:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

1.1 Scope of FprCEN/TS 19100-1
(1) FprCEN/TS 19100-1 gives basic design rules for mechanically supported glass components. This document is concerned with the requirements for resistance, serviceability, fracture characteristics and glass component failure consequences in relation to human safety, robustness, redundancy and durability of glass structures.
(2) This document covers the basis of design, materials, durability and structural design.
(3) This document also covers construction rules for the structural design of glass components.
1.2 Assumptions
(1) The assumptions of EN 1990 apply to FprCEN/TS 19100-1.
(2) This document is intended to be used in conjunction with EN 1990, EN 1991 (all parts), EN 1993-1-1, EN 1995 1 1, EN 1998 1, EN 1999 1 1 and EN 12488.

Tämän julkaisun valmistelusta Suomessa vastaa Yhteinen Toimialaliitto, www.ytl.fi.

Tuoteryhmä(t)

91.080.99 Muut rakenteet »
81.040.20 Rakennuslasi »

Sidokset

Velvoittavat viittaukset

EN 12150-1:2015+A1:2019 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 12488:2016 Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing
EN 1279-5:2018 Glass in building - Insulating glass units - Part 5: Product standard

EN 12150-1:2015+A1:2019 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 12488:2016 Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing
EN 1279-5:2018 Glass in building - Insulating glass units - Part 5: Product standard
EN 13022-1:2014 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
EN 13022-2:2014 Glass in building - Structural sealant glazing - Part 2: Assembly rules
EN 14179-1:2016 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 15434-1:2023 Bonding sealants - Part 1: Bonded glazing sealants for direct light exposure
EN 15434:2006+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
EN 1863-1:2011+A1:2016 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
EN 1990:2002 Eurocode - Basis of structural design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2:2024 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-3:2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2003 Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
EN 1991-2:2023 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
EN 572-2:2012 Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
EN 572-3:2012 Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
EN 572-4:2012 Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
EN 572-5:2012 Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
EN 572-6:2012 Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
EN 572-7:2012 Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass
EN 572-8:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard

Tekninen komitea

CEN/TC 250/SC 11 Structural Glass »

Direktiivi

305/2011 Rakennustuotteet

http://ec.europa.eu »

Vahvistuspäivä

26.11.2021

Julkaisupäivä

30.11.2021

Painos

1

Sivumäärä

45

Julkaisun kieli

englanti