Verkkokauppa
CEN/TR 17179:2018:en
Thermoplastics piping and ducting systems. Rainwater infiltration and storage attenuation systems. Practices for underground installation
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
This Technical Report is applicable to the installation of rainwater infiltration and storage/attenuation systems under gravity.
This Technical Report covers installations including:
- reservoirs made by assembled cuboid shaped thermoplastic boxes;
- integral components;
- ancillary components (e.g. access provisions and connections);
- geotextiles and/or geomembranes;
- embedment and backfill.
These systems are intended for underground use in landscape, pedestrian or vehicular traffic areas and are used outside building structures.
This Technical Report is only applicable to systems containing boxes to create a reservoir where the manufacturer has clearly stated in the installation instructions how the components should be assembled.
This Technical Report is a guidance document. It provides a set of general guidelines which gives best practice for installation.
NOTE 1 It is anticipated that additional recommendations and/or requirements (e.g. design, dimensioning and structural aspects) will be detailed in the relevant standards.
NOTE 2 Attention is drawn to the need to comply with national or local regulations.
Tämän julkaisun valmistelusta Suomessa vastaa Muoviteollisuus ry, puh. 09 172 841 (vaihde).
This Technical Report is applicable to the installation of rainwater infiltration and storage/attenuation systems under gravity.
This Technical Report covers installations including:
- reservoirs made by assembled cuboid shaped thermoplastic boxes;
- integral components;
- ancillary components (e.g. access provisions and connections);
- geotextiles and/or geomembranes;
- embedment and backfill.
These systems are intended for underground use in landscape, pedestrian or vehicular traffic areas and are used outside building structures.
This Technical Report is only applicable to systems containing boxes to create a reservoir where the manufacturer has clearly stated in the installation instructions how the components should be assembled.
This Technical Report is a guidance document. It provides a set of general guidelines which gives best practice for installation.
NOTE 1 It is anticipated that additional recommendations and/or requirements (e.g. design, dimensioning and structural aspects) will be detailed in the relevant standards.
NOTE 2 Attention is drawn to the need to comply with national or local regulations.
Tämän julkaisun valmistelusta Suomessa vastaa Muoviteollisuus ry, puh. 09 172 841 (vaihde).
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
EN 1610:2015 Construction and testing of drains and sewers
EN 1610:2015 Construction and testing of drains and sewers
Tekninen komitea
Vahvistuspäivä
09.02.2018
Julkaisupäivä
13.02.2018
Painos
1
Sivumäärä
22
Julkaisun kieli
englanti