This document specifies requirements related to permanent mounted equipment for rough-terrain variable-reach tractors (here-after referred to as “RTVR tractors”) and additional requirements for the combination. This document does not apply to: - machines designed primarily for earth moving, even if their buckets and blades are replaced with forks (see EN 474 series); - attachments. This document does not address hazards which may occur a) when handling suspended loads which may swing freely; b) when using RTVR tractors on public roads; c) when operating in potentially explosive atmospheres; d) when operating underground; e) when towing trailers; f) when fitted with a personnel work platform (additional requirements are given in EN 1459-3); g) when using cruise-control. This document does not provide a method of calculation for fatigue and strength of material. This document is not applicable to RTVR tractors manufactured before the date of its publication.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
EN 15000:2008 Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
EN 15830:2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification
EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
EN 15000:2008 Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
EN 15830:2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 62061:2005 Koneturvallisuus. Turvallisuuteen liittyvien sähköisten, elektronisten ja ohjelmoitavien elektronisten ohjausjärjestelmien toiminnallinen turvallisuus
EN IEC 62061:2021 Safety of machinery - Functional safety of safety-related control systems
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 13849-1:2023 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023)
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN ISO 13857:2019 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019)
EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
EN ISO 3457:2008 Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)
EN ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN ISO 5353:1998 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)
ISO 10263-2:2009 Earth-moving machinery -- Operator enclosure environment -- Part 2: Air filter element test method
ISO 10263-3:2009 Earth-moving machinery -- Operator enclosure environment -- Part 3: Pressurization test method
ISO 10263-4:2009 Earth-moving machinery -- Operator enclosure environment -- Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
ISO 13333:1994 Earth-moving machinery -- Dumper body support and operator's cab tilt support devices
ISO 15817:2012 Earth-moving machinery -- Safety requirements for remote operator control systems
ISO 15870:2000 Powered industrial trucks -- Safety signs and hazard pictorials -- General principles
ISO 16528-1:2007 Boilers and pressure vessels -- Part 1: Performance requirements
ISO 16528-2:2007 Boilers and pressure vessels -- Part 2: Procedures for fulfilling the requirements of ISO 16528-1
ISO 21507:2010 Earth-moving machinery -- Performance requirements for non-metallic fuel tanks
ISO 22915-10:2008 Industrial trucks -- Verification of stability -- Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
ISO 22915-14:2010 Industrial trucks -- Verification of stability -- Part 14: Rough-terrain variable-reach trucks
ISO 22915-20:2008 Industrial trucks -- Verification of stability -- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
ISO 6011:2003 Earth-moving machinery -- Visual display of machine operation
ISO 7000:2014 Graphical symbols for use on equipment -- Registered symbols
ISO 9533:2010 Earth-moving machinery -- Machine-mounted audible travel alarms and forward horns -- Test methods and performance criteria
ISO/DIS 15818:2013 Earth-moving machinery -- Lifting and tying-down attachment points -- Performance requirements
ISO/FDIS 5053-1:2014 Industrial trucks -- Terminology and classification -- Part 1: Types of industrial trucks
prEN 1459-5 Rough-terrain trucks - Safety requirements and verification - Part 5: Attachments and attachment interface