ISO 15027-2:2012 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia, including head, hand and feet protection. It is applicable for dry and wet abandonment suits. Constant wear suits are not covered by ISO 15027-2:2012. The requirements of constant wear suits are given in ISO 15027-1. Test methods are given in ISO 15027-3.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Basic health and ergonomic requirements
4.3 Accessories
4.4 Buddy lines
4.5 Conspicuity
4.6 Foam flotation material
4.7 Flammability
4.8 Temperature cycling
4.9 Leakage
4.10 Thermal protection in water
4.11 Performance requirements
4.12 Requirements on materials, fabrics and components
5 Marking
6 Information supplied by the manufacturer
7 Consumer information at point of sale
7.1 Data list
7.2 Consumer information label
Annex A Guidelines for manufacturers, users, regulators and industrial inspectors about immersion suits with respect to the application of thermal protection times relevant to the ISO 15027 series (informative)
4.12 Requirements on materials, fabrics and components
5 Marking
6 Information supplied by the manufacturer
7 Consumer information at point of sale
7.1 Data list
7.2 Consumer information label
Annex A Guidelines for manufacturers, users, regulators and industrial inspectors about immersion suits with respect to the application of thermal protection times relevant to the ISO 15027 series (informative)
CIE 15:2004
EN ISO 13688:2013 Protective clothing - General requirements (ISO 13688:2013)
IMO A.658(16):1989
CIE 15:2004
EN ISO 13688:2013 Protective clothing - General requirements (ISO 13688:2013)
IMO A.658(16):1989
ISO 105-A02:1993 Textiles -- Tests for colour fastness -- Part A02: Grey scale for assessing change in colour
ISO 105-E02:1994 Textiles -- Tests for colour fastness -- Part E02: Colour fastness to sea water
ISO 105-X12:2001 Textiles -- Tests for colour fastness -- Part X12: Colour fastness to rubbing
ISO 12401:2009 Small craft -- Deck safety harness and safety line -- Safety requirements and test methods
ISO 12402-2:2006 Personal flotation devices -- Part 2: Lifejackets, performance level 275 -- Safety requirements
ISO 12402-3:2006 Personal flotation devices -- Part 3: Lifejackets, performance level 150 -- Safety requirements
ISO 12402-4:2006 Personal flotation devices -- Part 4: Lifejackets, performance level 100 -- Safety requirements
ISO 12402-5:2006 Personal flotation devices -- Part 5: Buoyancy aids (level 50) -- Safety requirements
ISO 12402-6:2006 Personal flotation devices -- Part 6: Special purpose lifejackets and buoyancy aids -- Safety requirements and additional test methods
ISO 12402-7:2006 Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods
ISO 12402-8:2006 Personal flotation devices -- Part 8: Accessories -- Safety requirements and test methods
ISO 12402-9:2006 Personal flotation devices -- Part 9: Test methods
ISO 13934-1:1999 Textiles -- Tensile properties of fabrics -- Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13935-2:1999 Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 2: Determination of maximum force to seam rupture using the grab method
ISO 1421:1998 Rubber- or plastics-coated fabrics -- Determination of tensile strength and elongation at break
ISO 15027-3:2012 Immersion suits -- Part 3: Test methods
ISO 188:2011 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests
ISO 2411:2000 Rubber- or plastics-coated fabrics -- Determination of coating adhesion
ISO 3801:1977 Textiles -- Woven fabrics -- Determination of mass per unit length and mass per unit area
ISO 4674-1:2003 Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods
ISO 7854:1995 Rubber- or plastics-coated fabrics -- Determination of resistance to damage by flexing
ISO 9227:2012 Corrosion tests in artificial atmospheres -- Salt spray tests