SFS-EN ISO 22734-1:2025:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document specifies the safety requirements of hydrogen gas generation appliances or systems that use electrochemical reactions to electrolyse water to produce hydrogen, herein referred to as hydrogen generators.

Tämän julkaisun valmistelusta Suomessa vastaa Kemesta ry, puh. 09 149 9331.

Sisällysluettelo

Tuoteryhmä(t)

71.100.20 Teollisuuskäyttöön tarkoitetut kaasut »
71.120.99 Muut kemiantekniikan laitteet ja varusteet »

Sidokset

Velvoittavat viittaukset

IEC 31010:2019 Risk management - Risk assessment techniques
IEC 60068-2-18:2017 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements

Näytä julkaisuun liittyvät velvoittavat viittaukset

IEC 31010:2019 Risk management - Risk assessment techniques
IEC 60068-2-18:2017 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-10-1:2020 Corrigendum 1 - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
IEC 60079-14:2024 Explosive atmospheres - Part 14: Electrical installation design, selection and installation of equipment, including initial inspection
IEC 60079-17:2023 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
IEC 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
IEC 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60335-1:2020 Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60445:2021 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEC 60529:1989 Corrigendum 1 - Degrees of protection provided by enclosures (IP Code)
IEC 60730-1:2022 Automatic electrical controls - Part 1: General requirements
IEC 60947-1:2020 Low-voltage switchgear and controlgear - Part 1: General rules
IEC 60998-2-2:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
IEC 60999-2:2003 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
IEC 61010-1 AMD 1:2016
IEC 61131-1:2003 Programmable controllers - Part 1: General information
IEC 61131-2:2017 Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
IEC 61508-5:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
IEC 62368-1:2023 Audio/video, information and communication technology equipment - Part 1: Safety requirements
IEC/IEEE 60079-30-1:2015 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
ISO 10286:2021 Gas cylinders — Vocabulary
ISO 11119-1:2020 Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
ISO 11119-2:2020 Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
ISO 11119-3:2020 Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
ISO 15534-3:2000 Ergonomic design for the safety of machinery — Part 3: Anthropometric data
ISO 16111:2018 Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride
ISO 16528-1:2007 Boilers and pressure vessels — Part 1: Performance requirements
ISO 17398:2004 Safety colours and safety signs — Classification, performance and durability of safety signs
ISO 20485:2017 Non-destructive testing — Leak testing — Tracer gas method
ISO 26142:2010 Hydrogen detection apparatus — Stationary applications
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
ISO 4126-10:2024 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow
ISO 4126-1:2013 Safety devices for protection against excessive pressure — Part 1: Safety valves
ISO 4126-2:2018 Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices
ISO 4126-6:2014 Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices
ISO 4126-9:2008 Safety devices for protection against excessive pressure — Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices
ISO 7010:2019 Graphical symbols — Safety colours and safety signs — Registered safety signs
ISO 7866:2012 Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
ISO 80079-36:2016 Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements
ISO 80079-37:2016 Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''
ISO 9809-1:2019 Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa

Piiloita näkyvistä julkaisuun liittyvät velvoittavat viittaukset

Tekninen komitea

CEN/CLC/JTC 6 Hydrogen in energy systems »

Vahvistuspäivä

18.07.2025

Julkaisupäivä

22.07.2025

Painos

1

Sivumäärä

69

Julkaisun kieli

englanti