SFS Verkkokauppa

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

ISO 52000-1:2017 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way.
It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings 'as built', and existing buildings in the use phase as well as renovation.
NOTE Table 1 in the Introduction shows the relative position of ISO 52000-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1:2017.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Sisällysluettelo

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions

3.1 Building
3.2 Indoor and outdoor conditions
3.3 Technical building systems
3.4 Energy
3.5 Energy performance
3.6 Energy calculation

4 Symbols, subscripts and abbreviations

4.1 Symbols
4.2 Subscripts
4.3 Abbreviations

5 Description of the overarching framework and procedures

5.1 Output of the method
5.2 General description of the procedures and routing
5.3 Selection criteria between the methods

6 Overarching preparation steps

6.1 General
6.2 List of types and categories
6.3 Identification of types and categories for a specific case

7 Calculated energy performance of buildings

7.1 Output data
7.2 Calculation intervals and calculation period
7.3 Input data
7.4 Description of the calculation procedure

8 Measured overall energy performance and comparison with calculations

8.1 General
8.2 Output of the method
8.3 Measurement intervals and measurement period
8.4 Input data
8.5 Measurement procedures
8.6 Calculation of the energy performance based on measured energy
8.7 Comparison between calculated energy performance and measured energy performance
8.8 Measured energy performance reporting

9 Overall assessment of the energy performance of buildings

9.1 Categorization of building and/or spaces
9.2 Combination of building services included in EPB in each space
9.3 Useful floor area and air volume
9.4 Normalization to building size
9.5 Assessment boundary and perimeters
9.6 Overall energy performance
9.7 Share of renewable energy
9.8 Energy performance indicators for technical building systems
9.9 Calculation methods for energy performance indicators per part of a building and/or service

10 Zoning

10.1 General
10.2 Thermal zones and service areas
10.3 Spaces
10.4 Zoning rules
10.5 Assignment rules
10.6 Zoning procedure

11 Calculation of the energy performance, routing and energy balance

11.1 General
11.2 Overall calculation procedure (steps)
11.3 Calculation principles of the recovered gains and losses
11.4 Effect of building automation and control (BAC) and technical building management (TBM)
11.5 Climatic and external environment data
11.6 Overall energy performance

12 Common overarching output

12.1 General
12.2 Tabulated overview of the amounts of energy per energy carrier and energy service

Annex A Input and method selection data sheet — Template (normative)
Annex B Input and method selection data sheet — Default choices (informative)
Annex C Common subscripts (normative)
Annex D Calculation of measured energy performance (informative)
Annex E Calculation methods for energy performance indicators per part of a building and/or service (normative)
Annex F Alphabetical index of terms (informative)
Annex G Electrical grid related indicators (informative)
Annex H Proposal of indicators for the assessment of nearly Zero-Energy Buildings (NZEB) (informative)

Bibliography

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions

3.1 Building
3.2 Indoor and outdoor conditions
3.3 Technical building systems
3.4 Energy
3.5 Energy performance
3.6 Energy calculation

4 Symbols, subscripts and abbreviations

4.1 Symbols
4.2 Subscripts
4.3 Abbreviations

5 Description of the overarching framework and procedures

5.1 Output of the method
5.2 General description of the procedures and routing
5.3 Selection criteria between the methods

6 Overarching preparation steps

6.1 General
6.2 List of types and categories
6.3 Identification of types and categories for a specific case

7 Calculated energy performance of buildings

7.1 Output data
7.2 Calculation intervals and calculation period
7.3 Input data
7.4 Description of the calculation procedure

8 Measured overall energy performance and comparison with calculations

8.1 General
8.2 Output of the method
8.3 Measurement intervals and measurement period
8.4 Input data
8.5 Measurement procedures
8.6 Calculation of the energy performance based on measured energy
8.7 Comparison between calculated energy performance and measured energy performance
8.8 Measured energy performance reporting

9 Overall assessment of the energy performance of buildings

9.1 Categorization of building and/or spaces
9.2 Combination of building services included in EPB in each space
9.3 Useful floor area and air volume
9.4 Normalization to building size
9.5 Assessment boundary and perimeters
9.6 Overall energy performance
9.7 Share of renewable energy
9.8 Energy performance indicators for technical building systems
9.9 Calculation methods for energy performance indicators per part of a building and/or service

10 Zoning

10.1 General
10.2 Thermal zones and service areas
10.3 Spaces
10.4 Zoning rules
10.5 Assignment rules
10.6 Zoning procedure

11 Calculation of the energy performance, routing and energy balance

11.1 General
11.2 Overall calculation procedure (steps)
11.3 Calculation principles of the recovered gains and losses
11.4 Effect of building automation and control (BAC) and technical building management (TBM)
11.5 Climatic and external environment data
11.6 Overall energy performance

12 Common overarching output

12.1 General
12.2 Tabulated overview of the amounts of energy per energy carrier and energy service

Annex A Input and method selection data sheet — Template (normative)
Annex B Input and method selection data sheet — Default choices (informative)
Annex C Common subscripts (normative)
Annex D Calculation of measured energy performance (informative)
Annex E Calculation methods for energy performance indicators per part of a building and/or service (normative)
Annex F Alphabetical index of terms (informative)
Annex G Electrical grid related indicators (informative)
Annex H Proposal of indicators for the assessment of nearly Zero-Energy Buildings (NZEB) (informative)

Bibliography

Tuoteryhmä(t)

91.120.10 Rakennusten lämmöneristys »
94.001 Rakennusten energiatehokkuus - Yleinen, kokonaisenergia »

Sidokset

Velvoittavat viittaukset

ISO 7345:1987 Thermal insulation -- Physical quantities and definitions

Tekninen komitea

CEN/TC 371 Energy Performance of Buildings project group »

Direktiivi

2010/31/EU Rakennusten energiatehokkuudesta

http://ec.europa.eu »

Vahvistuspäivä

04.08.2017

Julkaisupäivä

08.08.2017

Painos

1

Sivumäärä

138

Julkaisun kieli

englanti

Verkkokauppa

SFS-EN ISO 52000-1:2017:en

Lähetä kaverille linkki tälle sivulle