ISO/IEC 80079-38:2016 is published as a dual logo standard and specifies the explosion protection requirements for the design, construction, assessment and information for use (maintenance, repair, marking) of equipment that may be an individual item or form an assembly. This includes machinery and components for use in mines susceptible to explosive atmospheres of firedamp and/or combustible dust. The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it may be assumed that equipment can be operated are: - temperature -20 °C to 60 °C; - pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); - and air with normal oxygen content, typically 21 % v/v. This part of ISO/IEC 80079 applies for equipment and components according to EPL Mb to be used in explosive atmospheres containing firedamp and/or combustible dust. For equipment and components according to EPL Ma, the requirements of this standard and of ISO 80079-36 and IEC 60079-0 apply. It is necessary to take account of external conditions to the equipment which may affect the hazard and the resultant protection measures. These measures may include ventilation, gas detection or gas drainage. This part of ISO/IEC 80079 also deals with the prevention of ignitions of explosive atmospheres caused by burning (or smouldering) of combustible material such as fabric fibres, plastic "O"-rings, rubber seals, lubricating oils or greases used in the construction of the equipment if such items could be an ignition source. For example, the mechanical failure of rotating shaft bearings can result in frictional heating that ignites its plastic cage, plastic seal or lubricating grease. Detailed requirements and test procedures for the fire protection of conveyer belts are not part of this part of ISO/IEC 80079. Keywords: explosive atmospheres in underground mines, combustible dust
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
EN 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
EN 60204-1:2018 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset
EN IEC 60079-0:2018 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset
EN 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
EN 60204-1:2018 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset
EN IEC 60079-0:2018 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset
EN IEC 60079-25:2022 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
EN IEC 60204-11:2019 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
IEC 60332-1-1 AMD 1:2015
IEC 60332-1-1 Edition 1.1:2015
IEC 60332-1-1:2004
IEC 60332-1-2 AMD 1:2015
IEC 60332-1-2 Edition 1.1:2015
IEC 60332-1-2:2004
IEC 60332-1-3 AMD 1:2015
IEC 60332-1-3 Edition 1.1:2015
IEC 60332-1-3:2004
IEC 60529:1989
IEC 62061:2005
ISO 13849-1:2015 Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
ISO 14916:1999 Thermal spraying -- Determination of tensile adhesive strength
ISO 14935:1998 Petroleum and related products -- Determination of wick flame persistence of fire-resistant fluids
ISO 15029-1:1999 Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 1: Spray flame persistence -- Hollow-cone nozzle method
ISO 1940-1:2003 Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
ISO 340:2013 Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method
ISO 630-5:2014 Structural steels -- Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
ISO 7010:2011 Graphical symbols -- Safety colours and safety signs -- Registered safety signs
ISO 80079-36:2016 Explosive atmospheres -- Part 36: Non-electrical equipment for explosive atmospheres -- Basic method and requirements
ISO 80079-37:2016 Explosive atmospheres -- Part 37: Non-electrical equipment for explosive atmospheres -- Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''
ISO/TS 15029-2:2012 Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 2: Spray test -- Stabilized flame heat release method