SFS-EN 50173-10:2025:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document specifies 1-pair cabling and can be used in conjunction with all the space-specific standards of the EN 50173 series but especially EN 50173-3 and EN 50173-6.
NOTE 1-pair cabling for EN 50173-2, EN 50173-4 and EN 50173-5 is for further study.
It delivers 1-pair cabling specifications to extend generic cabling systems according to the EN 50173 series.
This document specifies the:
- structure and minimum configuration for extension of generic cabling by 1-pair cabling;
- interfaces at the service outlet (SO/TO);
- performance requirements for cabling links and channels;
- implementation requirements and options;
- performance requirements for cabling components;
- conformance requirements and verification procedures.
This document takes into account the requirements specified in application standards listed in Annex C.

Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.

Tuoteryhmä(t)

35.110 Tietoverkot »

Sidokset

Velvoittavat viittaukset

EN 50173-1:2018 Tietotekniikka. Yleiskaapelointijärjestelmät. Osa 1: Yleiset vaatimukset
EN 50173-3:2018 Information technology - Generic cabling systems - Part 3: Industrial spaces
EN 50173-6:2018 Information technology - Generic cabling systems - Part 6: Distributed building services

Näytä julkaisuun liittyvät velvoittavat viittaukset

EN 50173-1:2018 Tietotekniikka. Yleiskaapelointijärjestelmät. Osa 1: Yleiset vaatimukset
EN 50173-3:2018 Information technology - Generic cabling systems - Part 3: Industrial spaces
EN 50173-6:2018 Information technology - Generic cabling systems - Part 6: Distributed building services
EN 50174-1:2018 Tietotekniikka. Kaapeloinnin asentaminen. Osa 1: Asennuksen spesifiointi ja laadunvarmistus
EN 50174-2:2018 Tietotekniikka. Kaapeloinnin asentaminen. Osa 2: Asennuksen suunnittelu ja asennuskäytännöt rakennusten sisätiloissa
EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
EN 50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables
EN 50288-8:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz
EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
EN 60512-11-12:2002 Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic
EN 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature
EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
EN 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
EN 60512-19-3:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance
EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
EN 60512-4-2:2002 Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge
EN 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump
EN 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock
EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
EN 62012-1:2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
EN IEC 60512-23-3:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method
EN IEC 63171-1:2020 Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style
EN IEC 63171:2025 Connectors for electrical and electronic equipment - Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity - General requirements and tests
IEC 61156-11:2019
IEC 61156-12:2021
IEC 61156-13:2023
IEC 61935-1:2019 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801-1 and related standards
IEC 61935-2:2022 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
IEC 63171-6:2020 Connectors for electrical and electronic equipment - Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz.
prEN IEC 61935-4 Specification for the testing of balanced and coaxial information technology cabling - Part 4: Installed balanced single-pair cabling as specified in ISO/IEC 11801-1 and related standards

Piiloita näkyvistä julkaisuun liittyvät velvoittavat viittaukset

Tekninen komitea

CLC/TC 215 Electrotechnical aspects of telecommunication equipment »

Vahvistuspäivä

04.07.2025

Julkaisupäivä

08.07.2025

Painos

1

Sivumäärä

53

Julkaisun kieli

englanti