ASME BPVC.CC.BPV-2023 standardi SFS verkkokaupasta

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document applies to photovoltaic modules used as construction products. It focuses on the properties of these photovoltaic modules relevant to essential building requirements as specified in the European Construction Product Regulation CPR 305/2011, and the applicable electro-technical requirements as stated in the Low Voltage Directive 2006/95/EC / or CENELEC standards. This document references international standards, technical reports and guidelines. For some applications in addition national standards (or regulations) for building products may apply in individual countries, which are not explicitly referenced here and for which harmonized European Standards are not yet available.
The document is addressed to manufacturers, planners, system designers, installers, testing institutes and building authorities.
This document does not apply to concentrating or building-attached photovoltaic modules.
This document addresses requirements on the PV modules in the specific ways they are intended to be mounted but not the mounting structure itself, which is within the scope of FprEN 50583- 2.

Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.

Tuoteryhmä(t)

27.160 Aurinkoenergiatekniikka »

Sidokset

Velvoittavat viittaukset

CEN/TR 15941:2010 Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data
CLC/TS 61836:2009 Solar photovoltaic energy systems - Terms, definitions and symbols
EN 12179:2000 Curtain walling - Resistance to wind load - Test method

CEN/TR 15941:2010 Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data
CLC/TS 61836:2009 Solar photovoltaic energy systems - Terms, definitions and symbols
EN 12179:2000 Curtain walling - Resistance to wind load - Test method
EN 12488:2016 Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing
EN 12519:2018 Windows and pedestrian doors - Terminology
EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass
EN 12758:2019 Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
EN 12758:2019+A1 Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
EN 12758:2019+A1:2023 Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
EN 1279-5:2018 Glass in building - Insulating glass units - Part 5: Product standard
EN 13022-1:2014 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
EN 13022-2:2006 Glass in building - Structural sealant glazing - Part 2: Assembly rules
EN 13022-2:2006+A1:2010 Glass in building - Structural sealant glazing - Part 2: Assembly rules
EN 13022-2:2014 Glass in building - Structural sealant glazing - Part 2: Assembly rules
EN 13116:2001 Curtain walling - Resistance to wind load - Performance requirements
EN 13116:2024 Curtain walling - Resistance to wind load - Performance requirements
EN 13119:2016 Curtain walling - Terminology
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 13501-2:2023 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
EN 13501-5:2016 Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests
EN 13830:2015+A1:2020 Curtain walling - Product standard
EN 13956:2012 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 14351-1:2006+A2:2016 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
EN 14449:2005 Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
EN 14500:2008 Blinds and shutters - Thermal and visual comfort - Test and calculation methods
EN 14500:2021 Blinds and shutters - Thermal and visual comfort - Test and calculation methods
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
EN 15804:2012+A2:2019 Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products
EN 15941:2024 Sustainability of construction works - Data quality for environmental assessment of products and construction work - Selection and use of data
EN 15942:2011 Sustainability of construction works - Environmental product declarations - Communication format business-to-business
EN 15942:2021 Sustainability of construction works - Environmental product declarations - Communication format business-to-business
EN 15978:2011 Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method
EN 16002:2018 Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
EN 1990:2002 Eurocode - Basis of structural design
EN 1990:2023 Eurocode - Basis of structural and geotechnical design
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2:2024 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-3:2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4:2005/A1:2010 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1993-1-10:2005 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-12:2007 Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-1-13:2024 Eurocode 3 - Design of steel structures - Part 1-13: Beams with large web openings
EN 1993-1-1:2005 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-1:2005/A1:2014 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-1:2022 Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-2:2005 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
EN 1993-1-2:2024 Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1993-1-3:2006 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-1-3:2024 Eurocode 3 - Design of steel structures - Part 1-3: Cold-formed members and sheeting
EN 1993-1-4:2006 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A1:2015 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A2:2020 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-5:2006 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A1:2017 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A2:2019 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2024 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-6:2007/A1:2017 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-7:2007 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
EN 1993-1-8:2005 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-8:2024 Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1993-1-9:2005 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1999-1-1:2007 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2007/A1:2009 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2007/A2:2013 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2023 Eurocode 9 - Design of aluminium structures - Part 1-1: General rules
EN 1999-1-2:2007 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-2:2023 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-3:2007 Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2007/A1:2011 Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2023 Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-4:2007 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2007/A1:2011 Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2023 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-5:2007 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 1999-1-5:2023 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 410:2011 Glass in building - Determination of luminous and solar characteristics of glazing
EN 50380:2017 Aurinkosähköpaneelien merkintä- ja dokumentointivaatimukset
EN 61082-1:2015 Sähkötekniikassa käytettävien dokumenttien laatiminen. Osa 1: Säännöt
EN 61215:1995 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
EN 61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
EN 61646:1997 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
EN 61646:2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
EN 61730-1:2007 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
EN 61730-2:2007 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
EN 62446-1:2016 Aurinkosähköjärjestelmät. Vaatimukset dokumentaatiolle, kunnossapidolle ja testaamiselle. Osa 1: Sähköverkkoon kytketyt järjestelmät. Dokumentaatio, käyttöönottotestit ja tarkastus
EN 673:2011 Glass in building - Determination of thermal transmittance (U value) - Calculation method
EN 674:2011 Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method
EN 675:2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
EN IEC 61730-1:2018 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
EN IEC 61730-2:2018 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
EN IEC/IEEE 82079-1:2020 Tuotteiden käyttöohjeiden laatiminen. Osa 1: Periaatteet ja yleiset vaatimukset
EN ISO 12543-1:2011 Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011)
EN ISO 12543-1:2021 Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts (ISO 12543-1:2021)
EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011)
EN ISO 12543-2:2021 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2021)
EN ISO 12543-3:2011 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
EN ISO 12543-3:2021 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2021)
EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011)
EN ISO 12543-5:2021 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
EN ISO 12543-6:2011 Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2011)
EN ISO 12543-6:2021 Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2021)
EN ISO 12631:2017 Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017)

Tekninen komitea

CLC/TC 82 Solar photovoltaic energy systems »

Vahvistuspäivä

29.01.2016

Julkaisupäivä

01.03.2016

Painos

1

Sivumäärä

24

Julkaisun kieli

englanti

SFS-EN 50583-1:en