SFS-EN 50117-1:2019:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This document covers coaxial cables for use in analogue and digital systems. This document should be used in conjunction with EN 50290-1-1.
Coaxial cables covered by this document operate in transverse electromagnetic mode (TEM) and are suitable for use in a wide range of digital and analogue applications including CATV, radio frequency systems, instrumentation, broadcasting, telecommunications and data network systems. Various constructions and materials provide for indoor and outdoor applications, including underground and overhead installations, and other environmental protection characteristics.
Generally, cables are designed for use in 50 Ohm and 75 Ohm characteristic impedance systems, although other types (e.g. 93/95 Ohm) are also covered.
Coaxial cables defined by this document may be incorporated into hybrid cable constructions with optical fibre or multi-element cable components.
All cables covered by this document may be subjected to voltages greater than 50 V AC or 75 V DC according to the relevant sectional or detail specification. However, these cables are not intended for direct connection to the mains electricity supply or other low impedance sources.

Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.

Tuoteryhmä(t)

33.120.10 Koaksiaalikaapelit. Aaltoputket »

Sidokset

Velvoittavat viittaukset

EN 50289-1-11:2016 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
EN 50289-1-2:2001 Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance
EN 50289-1-2:2023 Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance

EN 50289-1-11:2016 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
EN 50289-1-2:2001 Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance
EN 50289-1-2:2023 Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance
EN 50289-1-3:2001 Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength
EN 50289-1-4:2001 Communication cables - Specifications for test methods - Part 1-4: Electrical test methods - Insulation resistance
EN 50289-1-5:2001 Communication cables - Specifications for test methods - Part 1-5: Electrical test methods - Capacitance
EN 50289-1-7:2001 Communication cables - Specifications for test methods - Part 1-7: Electrical test methods - Velocity of propagation
EN 50289-1-8:2017 Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation
EN 50289-3-16:2001 Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods - Cable tensile performance
EN 50289-3-17:2002 Communication cables - Specifications for test methods - Part 3-17: Mechanical test methods - Adhesion of dielectric and sheath
EN 50289-3-2:2001 Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods - Tensile strength and elongation for conductor
EN 50289-3-5:2001 Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods - Crush resistance of the cable
EN 50289-3-6:2001 Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods - Impact resistance of the cable
EN 50289-3-7:2001 Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods - Abrasion resistance of the cable sheath
EN 50289-3-8:2013 Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings
EN 50289-3-9:2001 Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods - Bending tests
EN 50289-4-17:2015 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
EN 50289-4-2:2001 Communication cables - Specifications for test methods - Part 4-2: Environmental test methods - Water penetration
EN 50289-4-4:2008 Communication cables - Specifications for test methods - Part 4-4: Environmental test methods - Resistance to solvents and contaminating fluids
EN 50289-4-6:2001 Communication cables - Specifications for test methods - Part 4-6: Environmental test methods - Temperature cycling
EN 50289-4-7:2008 Communication cables - Specifications for test methods - Part 4-7: Environmental test methods - Damp heat, steady state
EN 50290-1-1:2001 Communication cables - Part 1-1: General
EN 50290-1-2:2004 Communication cables - Part 1-2: Definitions
EN 50290-2-20:2016 Communication cables - Part 2-20: Common design rules and construction - General
EN 50290-2-28:2002 Communication cables - Part 2-28: Common design rules and construction - Filling compounds for filled cables
EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
EN 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
EN 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
EN 62230:2007 Electric cables - Spark-test method
IEC 60028:1925 International standard of resistance for copper
IEC 60096-0-1:2012 Radio frequency cables - Part 0-1: Guide to the design of detail specifications - Coaxial cables
IEC 61196-1-115:2006 Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss)
IEC 62153-4-3:2013 Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
IEC 62153-4-4:2006 Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation as up to and above 3 GHz

Tekninen komitea

CLC/TC 46X Communication cables »

Direktiivi

2014/35/EU

http://ec.europa.eu »

Vahvistuspäivä

12.04.2019

Julkaisupäivä

16.04.2019

Painos

2

Sivumäärä

16

Julkaisun kieli

englanti