SFS-EN IEC 60335-1:2024:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This European Standard deals with the safety of electrical appliances for household environment and commercial purposes, their rated voltage being not more than 250 V for single-phase and 480 V for others.

Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.

Tuoteryhmä(t)

13.120 Kodin turvallisuus »
97.030 Kotikäyttöön tarkoitetut sähkölaitteet, yleistä »

Sidokset

Velvoittavat viittaukset

EN 22768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
EN 60061-1:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
EN 60065:2014 Audio, video and similar electronic apparatus - Safety requirements

EN 22768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
EN 60061-1:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
EN 60065:2014 Audio, video and similar electronic apparatus - Safety requirements
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60085:2008 Electrical insulation - Thermal evaluation and designation
EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
EN 60112:2003/A1:2009 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
EN 60127-10:2002 Miniature fuses - Part 10: User guide for miniature fuses
EN 60127-1:2006 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
EN 60127-1:2006/A1:2011 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
EN 60127-1:2006/A2:2015 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
EN 60127-2:1991 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:1991/A1:1995 Pienoisvarokkeet. Osa 2: Pienoissulakkeet
EN 60127-2:1991/A2:2000 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2003 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2003/A1:2003 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2003/A2:2010 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2014/A1:2023 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-3:1991 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:1996 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:1996/A2:2003 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:2015/A1:2020 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-4:1996 Miniature fuses - Part 4: Universal Modular Fuse-links (UMF)
EN 60127-4:1996/A1:2002 Miniature fuses - Part 4: Universal Modular Fuse-links (UMF)
EN 60127-4:1996/A2:2003 Miniature fuses - Part 4: Universal Modular Fuse-links (UMF)
EN 60127-4:2005 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
EN 60127-4:2005/A1:2009 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
EN 60127-4:2005/A2:2013 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
EN 60127-5:1991 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
EN 60127-6:1994 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 60127-6:1994/A1:1996 Pienoisvarokkeet. Osa 6: Pienoissulakkeita varten tarkoitetut varokepitimet
EN 60127-6:1994/A2:2003 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 60127-7:2013 Miniature fuses - Part 7: Miniature fuse-links for special applications
EN 60127-7:2016 Miniature fuses - Part 7: Miniature fuse-links for special applications
EN 60252-1:2011 AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation
EN 60252-1:2011/A1:2013 AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation
EN 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
EN 60384-14:2013 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
EN 60384-14:2013/A1:2016 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
EN 60417-1:1999 Graphical symbols for use on equipment - Part 1: Overview and application
EN 60417-2:1999 Graphical symbols for use on equipment - Part 2: Symbol originals
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 60529:1991/A1:2000 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 60529:1991/A2:2013 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 60598-1:2015 Valaisimet. Osa 1: Yleiset vaatimukset ja testit
EN 60598-1:2015/A1:2018 Luminaires - Part 1: General requirements and tests
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
EN 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 60730-1:2016/A1:2019 Automatic electrical controls - Part 1: General requirements
EN 60730-2-10:2007 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays
EN 60990:2016 Methods of measurement of touch current and protective conductor current
EN 60999-1:2000 Kytkentätarvikkeet. Kuparijohtimien liittämiseen tarkoitettujen ruuvityyppisten ja ruuvittomien puristusosien turvallisuusvaatimukset. Osa 1: Yleiset vaatimukset ja erityisvaatimukset 0,2 mm2 ... 35 mm2 johtimien liittämiseen tarkoitetuille puristusosille
EN 61000-4-13:2002 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
EN 61000-4-13:2002/A1:2009 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
EN 61000-4-13:2002/A2:2016 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
EN 61000-4-34:2007/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
EN 61000-4-4:2012 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
EN 61000-4-5:2014 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
EN 61032:1998 Koteloinnilla aikaansaatu henkilö- ja esinesuojaus. Todentamisessa käytettävät koettimet
EN 61058-1-1:2016 Switches for appliances - Part 1-1: Requirements for mechanical switches
EN 61058-1-2:2016 Switches for appliances - Part 1-2: Requirements for electronic switches
EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
EN 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
EN 61558-2-16:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
EN 61770:2009 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
EN 62133-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
EN 62133-2:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
EN 62471:2008 Photobiological safety of lamps and lamp systems
EN IEC 60127-1:2024 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
EN IEC 60127-6:2024 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN IEC 60127-8:2018 Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection
EN IEC 60127-8:2018/A1:2024 Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection
EN IEC 60238:2018 Edison screw lampholders
EN IEC 60309-2:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
EN IEC 60320-1:2021 Appliance couplers for household and similar general purposes - Part 1: General requirements
EN IEC 60320-2-3:2021 Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
EN IEC 60691:2023 Thermal-links - Requirements and application guide
EN IEC 60695-2-12:2021 Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
EN IEC 60695-2-13:2021 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
EN IEC 60730-2-8:2020 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
EN IEC 60730-2-9:2019 Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control.
EN IEC 60730-2-9:2019/A1:2019 Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control.
EN IEC 60738-1:2022 Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification
EN IEC 60799:2021 Electrical accessories - Cord sets and interconnection cord sets
EN IEC 60934:2019 Circuit breakers for equipment (CBE)
EN IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
EN IEC 61000-4-2:2025 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN IEC 61000-4-3:2020 Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
EN IEC 61000-4-6:2023 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
EN IEC 61058-1:2018 Switches for appliances - Part 1: General requirements
EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
EN IEC 62477-1:2023 Safety requirements for power electronic converter systems and equipment - Part 1: General
EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
EN ISO 178:2019 Plastics - Determination of flexural properties (ISO 178:2019)
EN ISO 179-1:2023 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023)
EN ISO 180:2023 Plastics - Determination of Izod impact strength (ISO 180:2023)
EN ISO 2178:2016 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016)
EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN ISO 527-1:2019 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)
EN ISO 527-2:1996 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 527-3:1995 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995)
EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)
EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997)
EN ISO 527-4:2021 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021, Corrected version 2022-02)
EN ISO 527-4:2023 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023)
EN ISO 527-5:1997 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997)
EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
EN ISO 8256:2023 Plastics - Determination of tensile-impact strength (ISO 8256:2023)
EN ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998)
EN ISO 9773:2024 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:2024)
FprEN IEC 60034-1:2021 Rotating electrical machines - Part 1: Rating and performance
IEC 60227-5:2011 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
IEC 60227:2007
IEC 60245:1967
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEC 60695-10-2:2014
IEC 62151:2000 Safety of equipment electrically connected to a telecommunication network
IEC 62821-1:2015 Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC/TR 60083:2015 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
ISO 7000:2019 Graphical symbols for use on equipment -- Registered symbols
ISO 9772:2020 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame

Tekninen komitea

CLC/TC 61 Safety of household and similar electrical appliances »

Direktiivi

2006/42/EC Koneturvallisuus
2014/35/EU
2014/53/EU

http://ec.europa.eu »

Vahvistuspäivä

05.01.2024

Julkaisupäivä

09.01.2024

Painos

1

Sivumäärä

214

Julkaisun kieli

englanti