SFS-EN IEC 63171:2025:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

IEC 63171:2025 is the general requirements and general tests part (general specification) of the whole IEC 63171 series, a set of International Standards covering shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current carrying capacity. It provides the signal integrity requirements, common to the whole series.

Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.

Tuoteryhmä(t)

31.220.10 Pistokytkimet. Koskettimet »

Sidokset

Velvoittavat viittaukset

EN 60068-1:2014 Ympäristöolosuhdetestaus. Osa 1: Yleistä ja opastusta
EN 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination
EN 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

Näytä julkaisuun liittyvät velvoittavat viittaukset

EN 60068-1:2014 Ympäristöolosuhdetestaus. Osa 1: Yleistä ja opastusta
EN 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination
EN 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass
EN 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
EN 60512-11-4:2002 Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature
EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
EN 60512-13-2:2006 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
EN 60512-13-5:2006 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
EN 60512-15-7:2008 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
EN 60512-25-9:2008 Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk
EN 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance
EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
EN 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock
EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
EN 60512-9-2:2012 Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
EN 61984:2009 Connectors - Safety requirements and tests
EN IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
EN IEC 60512-11-1:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence
EN IEC 60512-1:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
EN IEC 60512-28-100:2024 Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g
EN IEC 60664-1:2020 Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
EN IEC 62153-4-15:2021 Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
IEC 61156-1:2007
IEC 62153-4-9:2018
ISO/IEC 11801-1:2017 Information technology -- Generic cabling for customer premises -- Part 1: General requirements

Piiloita näkyvistä julkaisuun liittyvät velvoittavat viittaukset

Tekninen komitea

CLC/SR 48B Electrical connectors »

Vahvistuspäivä

19.06.2025

Julkaisupäivä

24.06.2025

Painos

2

Sivumäärä

52

Julkaisun kieli

englanti