SFS-EN 62109-1:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

IEC 62109-1:2010(E) applies to the power conversion equipment (PCE) for use in photovoltaic systems where a uniform technical level with respect to safety is necessary. Defines the minimum requirements for the design and manufacture of PCE for protection against electric shock, energy, fire, mechanical and other hazards. Provides general requirements applicable to all types of PV PCE.

Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.

Tuoteryhmä(t)

27.160 Aurinkoenergiatekniikka »

Sidokset

Velvoittavat viittaukset

ANSI/ASTM E84:2008
ANSI/UL 746B:2000
ANSI/UL 746C:2004

ANSI/ASTM E84:2008
ANSI/UL 746B:2000
ANSI/UL 746C:2004
ASTM E162-11a:2009
EN 60085:2008 Electrical insulation - Thermal evaluation and designation
EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
EN 60216-1:2001 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
EN 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
EN 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
EN 60309-1:1992 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1997 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1999 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 1: Yleiset vaatimukset
EN 60309-1:1999/A11:2004 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1999/A1:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1999/A2:2012 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 1: Yleiset vaatimukset
EN 60309-2:1992 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-2:1998 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-2:1999 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 2: Mitoitusvaatimukset
EN 60309-2:1999/A11:2004 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-2:1999/A1:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-2:1999/A2:2012 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-4:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
EN 60309-4:2007/A1:2012 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
EN 60320-1:1987 Appliance couplers for household and similar general purposes
EN 60320-1:1987/A11:1994 Appliance couplers for household and similar general purposes
EN 60320-1:1987/A1:1989 Appliance couplers for household and similar general purposes
EN 60320-1:1996 Kotitalouksiin ja vastaaviin käyttöihin tarkoitetut kojepistokytkimet. Osa 1: Yleiset vaatimukset
EN 60320-1:1996/A1:1996 Kotitalouksiin ja vastaaviin käyttöihin tarkoitetut kojepistokytkimet. Osa 1: Yleiset vaatimukset
EN 60320-1:1996/A2:1998 Kotitalouksiin ja vastaaviin käyttöihin tarkoitetut kojepistokytkimet. Osa 1: Yleiset vaatimukset
EN 60320-1:2001 Kotitalouksiin ja vastaaviin käyttöihin tarkoitetut kojepistokytkimet. Osa 1: Yleiset vaatimukset
EN 60320-1:2001/A1:2007 Appliance couplers for household and similar general purposes - Part 1: General requirements
EN 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
EN 60320-1:2015/A1:2021 Appliance couplers for household and similar general purposes - Part 1: General requirements
EN 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
EN 60320-3:2014/A1:2021 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
EN 60320-3:2014/A2:2022 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
EN 60695-11-10:1999 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN 60695-11-20:1999 Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods
EN 60695-11-5:2005 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
EN 60695-2-11:2001 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 60990:2016 Methods of measurement of touch current and protective conductor current
EN 61032:1998 Koteloinnilla aikaansaatu henkilö- ja esinesuojaus. Todentamisessa käytettävät koettimet
EN 61180-1:1994 High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements
EN IEC 62368-1:2020 Audio/video, information and communication technology equipment - Part 1: Safety requirements
EN IEC 62368-1:2024 Audio/video, information and communication technology equipment - Part 1: Safety requirements
EN ISO 178:2003 Plastics - Determination of flexural properties (ISO 178:2001)
EN ISO 179-1:2000 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000)
EN ISO 179-1:2000/A1:2005 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test - Amendment 1 (ISO 179-1:2000/A1:2005)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 179-1:2023 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023)
EN ISO 179-2:1999 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997)
EN ISO 179-2:1999/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011)
EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
EN ISO 180:2000 Plastics - Determination of Izod impact strength (ISO 180:2000)
EN ISO 3746:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)
EN ISO 4892-1:2000 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:1999)
EN ISO 4892-2:2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2006)
EN ISO 527-1:1996 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994)
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 527-1:2019 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)
EN ISO 527-2:1996 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 527-3:1995 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995)
EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)
EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997)
EN ISO 527-4:2021 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021)
EN ISO 527-4:2023 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023)
EN ISO 527-5:1997 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997)
EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
EN ISO 9614-2:1996 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996)
EN ISO 9614-3:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
HD 588.1 S1:1991 High-voltage test techniques - Part 1: General definitions and test requirements
HD 60364-1:2008 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
HD 60364-5-54:2007 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements, protective conductors and protective bonding conductors
IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60245-1:2003 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60664:201X
IEC 62020:2003
IEC/TR 60755:2008 General requirements for residual current operated protective devices
IEC/TS 60695-2-20:2004
ISO 261:1998 ISO general purpose metric screw threads -- General plan
ISO 262:1998 ISO general purpose metric screw threads -- Selected sizes for screws, bolts and nuts
ISO 4892-4:2004 Plastics -- Methods of exposure to laboratory light sources -- Part 4: Open-flame carbon-arc lamps
ISO 7000:2004 Graphical symbols for use on equipment -- Index and synopsis

Tekninen komitea

CLC/TC 82 Solar photovoltaic energy systems »

Direktiivi

2006/95/EC Pienjännitedirektiivi
2014/35/EU

http://ec.europa.eu »

Vahvistuspäivä

24.01.2011

Julkaisupäivä

01.03.2016

Painos

1

Sivumäärä

161

Julkaisun kieli

englanti