IEC 62006:2010 defines the test, the measuring methods and the contractual guarantee conditions for field acceptance tests of the generating machinery in small hydroelectric power installations. It applies to installations containing impulse or reaction turbines with unit power up to about 15 MW and reference diameter of about 3 m. The driven generator can be of synchronous or asynchronous type. This International Standard contains information about most of the tests required for acceptance of the hydraulic turbine such as safety approval tests, trial operating and reliability tests, as well for verification of cavitation, noise and vibration conditions, if required. This standard represents the typical methods used on smaller hydroelectric installations, and is divided into three classes as follows: Class A: Default, normal test program (panel measurement), to determine the maximum output of the installation. Class B: Recommended, extended test program, to determine the performance characteristics of the installation. Class C: Optional, comprehensive test program, to determine the absolute efficiency of the installation. All classes contain safety tests, trial operating tests, and reliability tests. This standard gives all necessary references for the contract in order to execute the test, evaluate, calculate and compare the result to the guarantee for all the classes A, B and C.
Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.
ANSI/IEEE 810:1987
EN 60041:1994 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
EN 60193:1999 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
ANSI/IEEE 810:1987
EN 60041:1994 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
EN 60193:1999 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
EN 60308:2005 Hydraulic turbines - Testing of control systems
EN 60609-1:2005 Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines
EN 60651:1994 Sound level meters
EN 61362:1998 Guide to specification of hydraulic turbine control systems
EN ISO 1680:1999 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machinery (ISO 1680:1999)
EN ISO 3746:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)
ISO 10816-3:2009 Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
ISO 1940-1:2003 Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
ISO 4412-1:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps
ISO 5168:1978 Measurement of fluid flow -- Estimation of uncertainty of a flow-rate measurement
ISO 7919-5:2005 Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 5: Machine sets in hydraulic power generating and pumping plants