SFS-EN 61851-1:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

IEC 61851-1:2010 applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network. It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed. This second edition cancels and replaces the first edition published in 2001. It constitutes a technical revision. The main changes with respect to the first edition of this standard are: - revision of connector definitions and current levels (Clause 8); - modification definition of pilot wire to pilot function; - division of Clause 9 to create Clauses 9 and 11; - Clause 9: specific requirements for inlet, plug and socket-outlet; - Clause 11: EVSE requirements: the basic generic requirements for charging stations; - renumbering of annexes; - deletion of previous Annex A and integration of charging cable requirements into new Clause 10; - Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B; - replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values; - new informative Annex C describing an alternative pilot function system.

Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.

Tuoteryhmä(t)

43.120 Sähköajoneuvot »

Sidokset

Velvoittavat viittaukset

EN 60038:2011 CENELECin standardijännitteet
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

EN 60038:2011 CENELECin standardijännitteet
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60276:1996 Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings
EN 60309-1:1992 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1997 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1999 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 1: Yleiset vaatimukset
EN 60309-2:1992 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-2:1998 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-2:1999 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 2: Mitoitusvaatimukset
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 60947-3:2009 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 60990:2016 Methods of measurement of touch current and protective conductor current
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN 61008-1:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
EN 61009-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
EN IEC 60309-1:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
EN IEC 60309-2:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
EN IEC 60664-1:2020 Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
EN IEC 60947-3:2021 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN IEC 61000-6-1:2019 Sähkömagneettinen yhteensopivuus (EMC). Osa 6-1: Yleiset standardit. Häiriönsieto kotitalous-, toimisto- ja kevyen teollisuuden ympäristöissä
EN IEC 61000-6-3:2021 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments
EN IEC 62196-1:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
EN IEC 62368-1:2020 Audio/video, information and communication technology equipment - Part 1: Safety requirements
EN IEC 62368-1:2024 Audio/video, information and communication technology equipment - Part 1: Safety requirements
HD 60364-4-41:2017 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60884-1:2002 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
IEC/TR 60755:2008 General requirements for residual current operated protective devices
ISO 6469-2:2009 Electrically propelled road vehicles -- Safety specifications -- Part 2: Vehicle operational safety means and protection against failures
ISO 6469-3:2001 Electric road vehicles -- Safety specifications -- Part 3: Protection of persons against electric hazards
SAE J1772:2010

Tekninen komitea

CLC/TC 69X Electrical systems for electric road vehicles »

Direktiivi

2006/95/EC Pienjännitedirektiivi
2014/35/EU

http://ec.europa.eu »

Vahvistuspäivä

23.01.2012

Kumouspäivä

19.07.2019

Painos

1

Sivumäärä

61

Julkaisun kieli

englanti

SFS-EN 61851-1:en Kumottu