NEW! IEC 60079-18:2014 is available as IEC Standards+ 60079-18:2014 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60079-18:2014 gives the specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components with the type of protection encapsulation "m" intended for use in explosive gas atmospheres or explosive dust atmospheres. This part applies only for encapsulated electrical equipment, encapsulated parts of electrical equipment and encapsulat ed Ex components (hereinafter always referred to as "m" equipment) where the rated voltage does not exceed 11 kV. The application of electrical equipment in atmospheres, which may contain explosive gas as well as combustible dust simultaneously, may require additional protective measures. This standard does not apply to dusts of explosives, which do not require atmospheric oxygen for combustion, or to pyrophoric substances. This standard does not take account of any risk due to an emission of flammable or toxic gas from the dust. This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requireme nt of this standard takes precedence. This International Standard is to be used in conjunction with IEC 60079-0, Explosive atmospheres - Part 0: Equipment-General requirements.This fourth edition cancels and replaces the third edition of IEC 60079-18:2009, and constitutes a technical revision. Please refer to the foreword of the document for a listing of the technical changes with respect to the previous edition. Keywords: encapsulation "m", explosive gas atmospheres, explosive dust atmospheres
Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 60079-7:2015 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 60127-10:2002 Miniature fuses - Part 10: User guide for miniature fuses
EN 60127-1:2006 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
EN 60127-1:2006/A1:2011 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
EN 60127-1:2006/A2:2015 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
EN 60127-2:1991 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:1991/A1:1995 Pienoisvarokkeet. Osa 2: Pienoissulakkeet
EN 60127-2:1991/A2:2000 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2003 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2003/A1:2003 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2003/A2:2010 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-2:2014/A1:2023 Miniature fuses - Part 2: Cartridge fuse-links
EN 60127-3:1991 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:1996 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:1996/A2:2003 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-3:2015/A1:2020 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-4:1996 Miniature fuses - Part 4: Universal Modular Fuse-links (UMF)
EN 60127-4:1996/A1:2002 Miniature fuses - Part 4: Universal Modular Fuse-links (UMF)
EN 60127-4:1996/A2:2003 Miniature fuses - Part 4: Universal Modular Fuse-links (UMF)
EN 60127-4:2005 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
EN 60127-4:2005/A1:2009 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
EN 60127-4:2005/A2:2013 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
EN 60127-5:1991 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
EN 60127-6:1994 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 60127-6:1994/A1:1996 Pienoisvarokkeet. Osa 6: Pienoissulakkeita varten tarkoitetut varokepitimet
EN 60127-6:1994/A2:2003 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 60127-7:2013 Miniature fuses - Part 7: Miniature fuse-links for special applications
EN 60127-7:2016 Miniature fuses - Part 7: Miniature fuse-links for special applications
EN 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
EN 60691:2016 Thermal-links - Requirements and application guide
EN 60738-1:2006 Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification
EN 61140:2016 Suojaus sähköiskulta. Asennusten ja laitteiden yhteiset ominaisuudet
EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
EN 62326-4-1:1997 Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability Detail Specification - Performance levels A, B and C
EN IEC 60079-0:2018 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset
EN IEC 60079-15:2019 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN IEC 60079-31:2024 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN IEC 60691:2023 Thermal-links - Requirements and application guide
EN IEC 60730-2-9:2019 Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control.
EN IEC 60738-1:2022 Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification
EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests