Verkkokauppa
SFS-EN 61215-1:2016:en Kumottu
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
IEC 61215-1:2016 lays down requirements for the design qualification and type approval of terrestrial photovoltaic (PV) modules suitable for long-term operation in general open-air climates, as defined in IEC 60721-2-1. This standard is intended to apply to all terrestrial flat plate module materials such as crystalline silicon module types as well as thin-film modules. The objective of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. This edition of IEC 61215-1 includes the following significant technical changes with respect to the second edition of IEC 61215:2005: new standard series structure consistent with other IEC standards: Part 1 lists general requirements, Part 1-x specifics for each PV technology and Part 2 defines testing. All tests defined in Part 2 are MQTs (module quality tests).
Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.
IEC 61215-1:2016 lays down requirements for the design qualification and type approval of terrestrial photovoltaic (PV) modules suitable for long-term operation in general open-air climates, as defined in IEC 60721-2-1. This standard is intended to apply to all terrestrial flat plate module materials such as crystalline silicon module types as well as thin-film modules. The objective of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. This edition of IEC 61215-1 includes the following significant technical changes with respect to the second edition of IEC 61215:2005: new standard series structure consistent with other IEC standards: Part 1 lists general requirements, Part 1-x specifics for each PV technology and Part 2 defines testing. All tests defined in Part 2 are MQTs (module quality tests).
Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
CLC/TS 61836:2009 Solar photovoltaic energy systems - Terms, definitions and symbols
EN 60269-6:2011 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
EN 60891:2010 Aurinkosähkölaitteet. Mitattujen virta-jännite-ominaisuuksien lämpötila- ja säteilyolosuhteiden korjausmenetelmä
EN 60269-6:2011 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
EN 60891:2010 Aurinkosähkölaitteet. Mitattujen virta-jännite-ominaisuuksien lämpötila- ja säteilyolosuhteiden korjausmenetelmä
Tekninen komitea
Vahvistuspäivä
23.12.2016
Kumouspäivä
16.04.2021
Painos
1
Sivumäärä
22
Julkaisun kieli
englanti