This European Standard specifies the requirements and methods of test for manual call points in fire detection and fire alarm systems in and around buildings. It takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for type A "direct operation" and type B "indirect operation" and covers those which are simple mechanical switches, those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control panels for signalling and identifying, for example, an address or location.
This European standard does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions, if such applications require additional or other requirements or tests than those given in this standard.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
EN 50130-4:1995 Hälytysjärjestelmät. Osa 4: Sähkömagneettinen yhteensopivuus. Tuoteperhestandardi: Palo- ja murtohälytysjärjestelmien ja turvapuhelinjärjestelmien häiriönsietovaatimukset
EN 54-1:1996 Fire detection and fire alarm systems - Part 1: Introduction
EN 54-2:1997 Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 50130-4:1995 Hälytysjärjestelmät. Osa 4: Sähkömagneettinen yhteensopivuus. Tuoteperhestandardi: Palo- ja murtohälytysjärjestelmien ja turvapuhelinjärjestelmien häiriönsietovaatimukset
EN 54-1:1996 Fire detection and fire alarm systems - Part 1: Introduction
EN 54-2:1997 Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 60068-1:1994 Environmental testing - Part 1: General and guidance
EN 60068-2-1:1993 Environmental testing - Part 2: Tests - Tests A: Cold
EN 60068-2-1:1993/A1:1993 Environmental testing - Part 2: Tests - Tests A: Cold
EN 60068-2-1:1993/A2:1994 Environmental testing - Part 2: Tests - Tests A: Cold
EN 60068-2-2:1993 Basic environmental testing procedures - Part 2: Tests - Tests B: Dry heat
EN 60068-2-2:1993/A1:1993 Basic environmental testing procedures - Part 2: Tests - Tests B: Dry heat
EN 60068-2-2:1993/A2:1994 Basic environmental testing procedures - Part 2: Tests - Tests B: Dry heat
EN 894-3:2000 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN ISO 3098-0:1997 Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997)
HD 323.2.3 S2:1987 Basic environmental testing procedures - Part 2: Tests - Test Ca: Damp heat, steady state
HD 323.2.30 S3:1988 Basic environmental testing procedures - Part 2: Tests - Test Db and guidance: Damp heat, cyclic (12 + 12 hour cycle)
HD 323.2.56 S1:1990 Basic environmental testing procedures - Part 2: Tests - Test Cb: Damp heat, steady state, primarily for equipment
IEC 60068-1:1988
IEC 60068-2-1 AMD 1:1993
IEC 60068-2-1 AMD 2:1994
IEC 60068-2-18 AMD 1:1993
IEC 60068-2-18:1989
IEC 60068-2-1:1990
IEC 60068-2-2 AMD 1:1993
IEC 60068-2-2 AMD 2:1994
IEC 60068-2-27:1987
IEC 60068-2-2:1974
IEC 60068-2-30 AMD 1:1985
IEC 60068-2-30:1980
IEC 60068-2-3:1969
IEC 60068-2-42:1982
IEC 60068-2-56:1988
IEC 60068-2-6:1995
ISO 105-Z06:1998 Textiles -- Tests for colour fastness -- Part Z06: Evaluation of dye and pigment migration
ISO 1402:1994 Rubber and plastics hoses and hose assemblies -- Hydrostatic testing
ISO 209-1:1989 Wrought aluminium and aluminium alloys -- Chemical composition and forms of products -- Part 1: Chemical composition
ISO 3098-0:1997 Technical product documentation -- Lettering -- Part 0: General requirements
ISO 3864:1984 Safety colours and safety signs