This document specifies safety and in water performance requirements for construction, sizing, marking and information supplied by the manufacturer for swimming aids intended to ensure a degree of buoyancy to assist beginners with movement through the water while learning to swim or while learning part of a swimming stroke. It also gives methods of test for verification of these requirements. This document applies only to swimming devices that are designed to be worn, to be securely attached to the body and which have either inherent buoyancy or can be inflated. It only applies to class B swimming devices intended to introduce the user to the range of swimming strokes. It does not apply to class A or class C swimming devices, to pull buoys, swim rings, lifebuoys, buoyancy aids, lifejackets or aquatic toys. This document is not applicable for products known as 'baby neck rings' aiming to keep the user's airways above the water level.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
EN 20105-A02:1994 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
EN 71-1:2014+A1:2018 Safety of toys - Part 1: Mechanical and physical properties
EN ISO 105-E03:2010 Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010)
EN 20105-A02:1994 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
EN 71-1:2014+A1:2018 Safety of toys - Part 1: Mechanical and physical properties
EN ISO 105-E03:2010 Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010)
EN ISO 105-E04:2013 Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013)
EN ISO 105-X12:2016 Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016)
EN ISO 216:2007 Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007)
EN ISO 25649-1:2017 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
EN ISO 7010:2020 Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2019, Corrected version 2020-06)
ISO 3864-1:2011 Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings