Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. Part 1: General requirements (ISO 10438-1:2007)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
ISO 10438-1:2007 specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers. ISO 10438-1:2007 is intended to be used in conjunction with ISO 10438-2, ISO 10438-3 or ISO 10438-4, as appropriate.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
3.1 Terms and definitions
3.2 Abbreviated terms
4 General
4.1 Dimensions and units
4.2 Design
4.3 System selection
4.4 Pressure design code
4.5 Basic design
4.6 Welding
4.7 Statutory requirements
4.8 Documentation requirements
5 Piping
5.1 General
5.2 Oil piping
5.3 Instrument piping and tubing
5.4 Process piping
5.5 Intercoolers and aftercoolers
6 Instrumentation, control and electrical systems
6.1 General
6.2 Alarm, shutdown and control systems
6.3 Instrumentation
6.4 Electrical systems
7 Inspection testing, and preparation for shipment
7.1 General
7.2 Inspection
7.3 Testing
7.4 Preparation for shipment
8 Vendor's data
8.1 General
8.2 Proposals
8.3 Contract data
Annex A Datasheets (informative)
Annex B Symbols (informative)
Annex C Vendor drawing and data requirements (VDDR) (informative)
Annex D Oil or gas filter performance and oil-system cleanliness testing (informative)
Annex E International materials specifications (informative)
Annex F Explanation of reservoir levels (informative)
ANSI/ASME B 16.11:2009
ANSI/ASME Y 14.2M:2008
ASME B1.1:2003
ANSI/ASME B 16.11:2009
ANSI/ASME Y 14.2M:2008
ASME B1.1:2003
ASME B16.5:2003
ASTM A 193/A 193M:2007 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A 194/A 194M:2007 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM E 709:2001 Standard Guide for Magnetic Particle Testing
ASTM E 94:2004
IEC 60079-0:2007
IEC 60079-1-1:2002
IEC 60079-10:2002
IEC 60079-11 Corrigendum 1:2006
IEC 60079-11:2006
IEC 60079-14:2002
IEC 60079-15:2005
IEC 60079-17:2007
IEC 60079-18:2004
IEC 60079-19:2006
IEC 60079-1:2007
IEC 60079-25:2003
IEC 60079-26:2006
IEC 60079-27:2005
IEC 60079-28:2006
IEC 60079-29-1:2007
IEC 60079-29-2:2007
IEC 60079-2:2007
IEC 60079-30-1:2007
IEC 60079-30-2:2007
IEC 60079-4 AMD 1:1995
IEC 60079-4:1975
IEC 60079-4A:1970
IEC 60079-5:2007
IEC 60079-6:2007
IEC 60079-7:2006
IEC 60529:1989
ISO 10434:2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
ISO 13706:2005 Petroleum, petrochemical and natural gas industries -- Air-cooled heat exchangers
ISO 15649:2001 Petroleum and natural gas industries -- Piping
ISO 15761:2002 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
ISO 16812:2007 Petroleum, petrochemical and natural gas industries -- Shell-and-tube heat exchangers
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads -- Part 1: Dimensions, tolerances and designation