Metallic and other inorganic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods (ISO 27874:2008)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
ISO 27874:2008 specifies the requirements for electrodeposited gold and gold alloy coatings for electrical, electronic and other engineering applications on metallic and non-metallic substrates. It also specifies test methods for measuring the properties of the coatings. Although this International Standard does not specify the condition, finish or surface roughness of the basis material prior to electroplating, the appearance and serviceability of electroplated gold or gold alloy coatings depends on the condition of the basis material. It is essential that the purchaser specify the surface finish and roughness of the basis material in order to conform to the product requirements. This International Standard does not apply to coatings on threaded articles or to coatings on sheet or strip in non-fabricated form.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied to the electroplater
4.1 Essential information
4.2 Additional information
5 Designation
5.1 General
5.2 Designation specifications
5.3 Designating the basis material
5.4 Designation of heat treatment requirements
5.5 Examples
6 Requirements and test methods
6.1 General
6.2 Appearance
6.3 Thickness
6.4 Porosity
6.5 Accelerated-corrosion testing
6.6 Composition
6.7 Stress relief heat treatment prior to electroplating
6.8 Hydrogen embrittlement relief heat treatment after electroplating
6.9 Adhesion
6.10 Electrical properties
6.11 Microhardness
6.12 Solderability
6.13 Wear resistance
6.14 Ductility
6.15 Undercoats
6.16 Freedom from contamination
7 Sampling
Annex A Requirements for undercoats (normative)
Annex B Methods of measuring the thickness of gold and gold alloy coatings (normative)
IEC 60068-2-20:2008
ISO 10289:1999 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests
ISO 10308:2006 Metallic coatings -- Review of porosity tests
IEC 60068-2-20:2008
ISO 10289:1999 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests
ISO 10308:2006 Metallic coatings -- Review of porosity tests
ISO 12687:1996 Metallic coatings -- Porosity tests -- Humid sulfur (flowers of sulfur) test
ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
ISO 14647:2000 Metallic coatings -- Determination of porosity in gold coatings on metal substrates -- Nitric acid vapour test
ISO 2064:1996 Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness
ISO 2080:2008 Metallic and other inorganic coatings -- Surface treatment, metallic and other inorganic coatings -- Vocabulary
ISO 2177:2003 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
ISO 2819:1980 Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion
ISO 3497:2000 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
ISO 3543:2000 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method
ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests
ISO 4518:1980 Metallic coatings -- Measurement of coating thickness -- Profilometric method
ISO 4519:1980 Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes
ISO 4524-2:2000 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests
ISO 4524-3:1985 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 3: Electrographic tests for porosity
ISO 4524-6:1988 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 6: Determination of the presence of residual salts
ISO 9587:2007 Metallic and other inorganic coatings -- Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
ISO 9588:2007 Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement