ISO 10442:2002 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories, for use in the petroleum, chemical and gas service industries. It is also applicable to gas services other than air that are non-hazardous and non-toxic. It is not applicable to machines that develop a pressure rise of less than 35 kPa above atmospheric pressure, which are classed as fans or blowers.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic design
4.1 General
4.2 Package
4.3 Integrally geared compressor
4.4 Driver
4.5 Driver-to-compressor coupling and guard
4.6 Intercoolers
5 Accessories
5.1 Aftercooler
5.2 Air intake filter-silencer
5.3 Discharge blowoff silencer
6 Inspection, testing and preparation for shipment
6.1 General
6.2 Inspection
6.3 Testing
6.4 Preparation for shipment
7 Vendor data
7.1 Proposals
7.2 Contract data
Annex A Data sheets (informative)
Annex B Material specifications for major component parts (informative)
Annex C Rotor dynamic logic diagrams (see ISO 10439) (informative)
AGMA 2000-A:1988
AGMA 6011-I:2003
ANSI/ABMA 20:1996
ANSI/ABMA 7:1995
API RP 520 PT I:2000
API RP 520 PT II:2003
API STD 670:2000
ASME PTC 10:1997
ASTM A 275/A 275M:2008 Standard Practice for Magnetic Particle Examination of Steel Forgings
DIN 3990-11:1989
DIN 3990-1:1987
DIN 3990-21:1989
DIN 3990-2:1987
DIN 3990-31:1990
DIN 3990-3:1987
DIN 3990-41:1990
DIN 3990-4:1987
DIN 3990-5:1987
DIN 3990-6:1994
IEC 60079-10:2002
ISO 10436:1993 Petroleum and natural gas industries -- General-purpose steam turbines for refinery service
ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 1: General requirements
ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 2: Special-purpose oil systems
ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 3: General-purpose oil systems
ISO 10438-4:2007 Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 4: Self-acting gas seal support systems
ISO 10441:2007 Petroleum, petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- Special-purpose applications
ISO 261:1998 ISO general purpose metric screw threads -- General plan
ISO 262:1998 ISO general purpose metric screw threads -- Selected sizes for screws, bolts and nuts
ISO 3511-1:1977 Process measurement control functions and instrumentation -- Symbolic representation -- Part 1: Basic requirements
ISO 3744:2010 Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for an essentially free field over a reflecting plane
ISO 5389:2005 Turbocompressors -- Performance test code
ISO 7005-2:1988 Metallic flanges -- Part 2: Cast iron flanges
ISO 724:1993 ISO general-purpose metric screw threads -- Basic dimensions
ISO 9614-1:1993 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 1: Measurement at discrete points
ISO 9614-2:1996 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 2: Measurement by scanning
ISO 965-1:1998 ISO general-purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data
ISO 965-1:1998/Cor 1:2009
ISO 965-2:1998 ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
ISO 965-3:1998 ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads
ISO 965-3:1998/Cor 1:2009
ISO 965-4:1998 ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 965-5:1998 ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
NEMA SM 23:1991