Petroleum and natural gas industries. Design and operation of subsea production systems. Part 1: General requirements and recommendations (ISO 13628-1:2005)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
ISO 13628-1:2005 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. ISO 13628-1:2005 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard. The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells. ISO 13628-1:2005 and its related subsystem standards apply as far as the interface limits described in Clause 4. Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviated terms
4 Systems and interface descriptions
4.1 General
4.2 System description
4.3 Subsystem interfaces
5 Design
5.1 General
5.2 Design criteria
5.3 Field development
5.4 Design loads
5.5 System design
5.6 Subsea wellhead
5.7 Tubing hanger/tree system
5.8 Completion/workover riser system
5.9 Mudline casing suspension system
5.10 Production controls
5.11 Flowlines and end connections
5.12 Template and manifold systems
5.13 Production risers
5.14 ROV/ROT intervention systems
5.15 Colours and marking
6 Materials and corrosion protection
6.1 Material evaluation
6.2 Metallic materials
6.3 Non-metallic materials
6.4 Bolting materials for subsea applications
6.5 External corrosion protection
6.6 Design limitations for materials
7 Manufacturing and testing
7.1 General requirements and recommendations
7.2 Test procedures
7.3 Integration testing
8 Operations
8.1 General
8.2 Transportation and handling
8.3 Installation
8.4 Drilling and completion
8.5 Hook-up and commissioning
8.6 Well intervention
8.8 Decommissioning
9 Documentation
9.1 General
9.2 Engineering and manufacturing
9.3 Operating and maintenance
9.4 As-built/as-installed documentation
Annex A Description of subsea production systems (informative)
Annex B Colours and marking (normative)
Annex C Integration testing of subsea production equipment (informative)
Annex D Typical procedures for commissioning (informative)
Annex E Documentation for operation (informative)
Annex F Datasheets (informative)
Annex G Structures, process valves and piping (informative)
Annex H System engineering in subsea field developments (informative)
Annex I Flow assurance considerations (informative)
API RP 2A:1991
DNV 2.7-1
ISO 10423:2009 Petroleum and natural gas industries -- Drilling and production equipment -- Wellhead and christmas tree equipment
API RP 2A:1991
DNV 2.7-1
ISO 10423:2009 Petroleum and natural gas industries -- Drilling and production equipment -- Wellhead and christmas tree equipment
ISO 12944-1:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction
ISO 12944-2:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments
ISO 12944-3:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 3: Design considerations
ISO 12944-4:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation
ISO 12944-5:2007 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems
ISO 12944-6:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 6: Laboratory performance test methods
ISO 12944-7:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 7: Execution and supervision of paint work
ISO 12944-8:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 8: Development of specifications for new work and maintenance
ISO 13535:2000 Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment
ISO 13628-4:2010 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 4: Subsea wellhead and tree equipment
ISO 13628-5:2009 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 5: Subsea umbilicals
ISO 13628-6:2006 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 6: Subsea production control systems
ISO 13628-7:2005 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems
ISO 13628-8:2002 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
ISO 13628-9:2000 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 9: Remotely Operated Tool (ROT) intervention systems
ISO 15156-1:2001 Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 1: General principles for selection of cracking-resistant materials
ISO 15156-1:2001/Cor 1:2005
ISO 15156-2:2003 Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons
ISO 15156-2:2003/Cor 1:2005
ISO 15156-3:2003 Petroleum and natural gas industries -- Materials for use in H2S-containing environments in oil and gas production -- Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 15156-3:2003/Cor 1:2005
ISO 15156-3:2003/Cor 2:2005
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries -- Non-metallic materials in contact with media related to oil and gas production -- Part 1: Thermoplastics
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 8503-1:1988 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 8503-2:1988 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure
ISO 8503-3:1988 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Focusing microscope procedure
ISO 8503-4:1988 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Stylus instrument procedure
ISO 8503-5:2003 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 5: Replica tape method for the determination of the surface profile
ISO 9588:2007 Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement