SFS-EN ISO 13628-3:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This part of ISO 13628 specifies requirements and gives recommendations for the design, fabrication and operation of TFL equipment and systems.
The procedures and requirements presented are for the hydraulic servicing of downhole equipment, subsea tree and tubing hanger, and flowlines and equipment within the flowlines.
This part of ISO 13628 primarily addresses TFL systems for offshore, subsea applications but it may also be used in other applications such as highly-deviated wells or horizontally-drilled wells.
Subsea separation, boosting, metering and downhole pumps are outside the scope of this part of ISO 13628.

Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.

Sisällysluettelo

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms

3.1 Terms and definitions
3.2 Abbreviated terms

4 TFL system

4.1 Description of system
4.2 TFL components
4.3 System/equipment design
4.4 Pressure rating

5 TFL surface equipment

5.1 General
5.2 Service pump
5.3 TFL control manifold
5.4 TFL control console and instrumentation
5.5 Lubricator
5.6 Fluid storage and working tank
5.7 Separator
5.8 Testing

6 TFL piping system

6.1 General
6.2 Design
6.3 Fabrication
6.4 Testing

7 Subsea tree, tubing hanger, diverters and selectors

7.1 Subsea tree design
7.2 Subsea tree testing
7.3 Tubing hanger design
7.4 Tubing hanger testing
7.5 Diverters, deflectors and selectors
7.6 Diverter design
7.7 Diverter testing

8 Completion equipment and tools

8.1 General
8.2 Completion design
8.3 Tubing
8.4 Surface-controlled subsurface safety system
8.5 Packers
8.6 Telescoping joints
8.7 Landing nipples
8.8 Circulation members
8.9 Circulation controls
8.10 Standing valves and isolation/production devices
8.11 TFL tool design

9 Operations

9.1 General
9.2 Personnel and training
9.3 Completion equipment
9.4 Satellite well and template well control systems
9.5 Service planning and documentation
9.6 Fluid selection/well preparation
9.7 Pumping operations
9.8 Returning well to production

10 Summary of capabilities

Annex A TFL pipe (normative)
Annex B TFL operating pressure (informative)
Annex C TFL completions (informative)
Annex D TFL capabilities (informative)

Bibliography

Näytä kaikki

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms

3.1 Terms and definitions
3.2 Abbreviated terms

4 TFL system

4.1 Description of system
4.2 TFL components
4.3 System/equipment design
4.4 Pressure rating

5 TFL surface equipment

5.1 General
5.2 Service pump
5.3 TFL control manifold
5.4 TFL control console and instrumentation
5.5 Lubricator
5.6 Fluid storage and working tank
5.7 Separator
5.8 Testing

6 TFL piping system

6.1 General
6.2 Design
6.3 Fabrication
6.4 Testing

7 Subsea tree, tubing hanger, diverters and selectors

7.1 Subsea tree design
7.2 Subsea tree testing
7.3 Tubing hanger design
7.4 Tubing hanger testing
7.5 Diverters, deflectors and selectors
7.6 Diverter design
7.7 Diverter testing

8 Completion equipment and tools

8.1 General
8.2 Completion design
8.3 Tubing
8.4 Surface-controlled subsurface safety system
8.5 Packers
8.6 Telescoping joints
8.7 Landing nipples
8.8 Circulation members
8.9 Circulation controls
8.10 Standing valves and isolation/production devices
8.11 TFL tool design

9 Operations

9.1 General
9.2 Personnel and training
9.3 Completion equipment
9.4 Satellite well and template well control systems
9.5 Service planning and documentation
9.6 Fluid selection/well preparation
9.7 Pumping operations
9.8 Returning well to production

10 Summary of capabilities

Annex A TFL pipe (normative)
Annex B TFL operating pressure (informative)
Annex C TFL completions (informative)
Annex D TFL capabilities (informative)

Bibliography

Tuoteryhmä(t)

75.180.10 Tutkimus-, poraus- ja tuotantolaitteet »

Sidokset

Velvoittavat viittaukset

API RP 14E:1991
API STD 1104:1999
ISO 11960:1996 Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells

Tekninen komitea

CEN/TC 12 Oil and gas industries including lower carbon energy »

Vahvistuspäivä

20.08.2001

Julkaisupäivä

06.08.2002

Painos

1

Sivumäärä

77

Julkaisun kieli

englanti