SFS-EN ISO 14923:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

ISO 14923:2003 specifies an overview of the characteristics of coatings produced by thermal spraying.
It is not possible in ISO 14923:2003 to go into details regarding the different types of coatings and large numbers of coatings due to the fact that all meltable materials can be processed by thermal spraying and that so many and varied thermal spraying processes exist. The tests described are procedures and test criteria in general use for thermally sprayed coatings.
Any test methods not mentioned are only used in special cases or under laboratory conditions.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Sisällysluettelo

Tuoteryhmä(t)

25.220.20 Pintakäsittely »

Sidokset

Velvoittavat viittaukset

EN 1159-2:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
EN 623-2:1993 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity
EN 821-2:1997 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method

EN 1159-2:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
EN 623-2:1993 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity
EN 821-2:1997 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
EN ISO 14232-1:2017 Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
EN ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
EN ISO 14917:2017 Thermal spraying - Terminology, classification (ISO 14917:2017)
EN ISO 14919:2015 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)
EN ISO 14919:2023 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023)
EN ISO 14922-1:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999)
EN ISO 14922-2:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
EN ISO 14922-3:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999)
EN ISO 14922-4:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999)
EN ISO 14922:2021 Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021)
EN ISO 18452:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005)
EN ISO 18754:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of density and apparent porosity (ISO 18754:2020)
EN ISO 18755:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by flash method (ISO 18755:2022)
EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018)
EN ISO 20502:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009)
EN ISO 2064:2000 Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996)
EN ISO 2178:2016 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016)
EN ISO 22479:2022 Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
EN ISO 26423:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009)
EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN ISO 3452-1:2021 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)
EN ISO 3543:2000 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000)
EN ISO 3868:1994 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976)
EN ISO 3882:2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)
EN ISO 3882:2024 Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2024)
EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980)
EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
EN ISO 4541:1994 Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978)
EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)
EN ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018)
EN ISO 6507-1:2023 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023)
EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018)
EN ISO 6507-3:2018 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN ISO 6508-1:2023 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)
EN ISO 6988:1994 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985)
EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
EN ISO 9220:1994 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)
EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
IEC 60093:1980
IEC 60167:1964
IEC 60345:1971
IEC 60468:1974
ISO 13565-1:1996 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions
ISO 13565-2:1996 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve
ISO 14577-1:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method
ISO 14577-2:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines
ISO 14577-3:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
ISO 2063:1991 Metallic and other inorganic coatings -- Thermal spraying -- Zinc, aluminium and their alloys
ISO 3274:1996 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
ISO 4287:1997 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests
ISO 8301:1991 Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus
ISO 8894-1:1987 Refractory materials -- Determination of thermal conductivity -- Part 1: Hot-wire method (cross-array)
ISO 9227:1990 Corrosion tests in artificial atmospheres -- Salt spray tests

Tekninen komitea

CEN/TC 240 Thermal spraying and thermally sprayed coatings »

Vahvistuspäivä

26.01.2004

Julkaisupäivä

13.02.2004

Painos

1

Sivumäärä

16

Julkaisun kieli

englanti