SFS-EN ISO 16137:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

ISO 16137:2006 specifies requirements for the design, functional characteristics and manufacture of check valves made of thermoplastics materials intended to allow the flow of liquid fluids through the valve in one direction only and to prevent backflow, their connection to the pipe system, the body materials and their pressure/temperature rating between -40 degrees Celsius and + 120 degrees Celsius, for a lifetime of 25 years, and also specifies their tests.
ISO 16137:2006 is applicable to valves to be installed in industrial pipe systems, irrespective of the field of application and the fluids to be conveyed.
It is concerned with the range of DN 8, DN 10, DN 15, DN 20, DN 25, DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300, DN 350, DN 400, DN 500 and DN 600, and the range of PN 6, PN 10, PN 16, PN 25, and Class 150 and Class 300.

Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).

Sisällysluettelo

Tuoteryhmä(t)

23.060.50 Takaiskuventtiilit »

Sidokset

Velvoittavat viittaukset

EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid

EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN 558:2017 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
EN 736-3:2008 Valves - Terminology - Part 3: Definition of terms
ISO 10931:2005 Plastics piping systems for industrial applications -- Poly(vinylidene fluoride) (PVDF) -- Specifications for components and the system
ISO 10931:2005/Amd 1:2015
ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method
ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient
ISO 15493 AMD 1:2016
ISO 15493 Technical Corrigendum 1:2004
ISO 15493:2003 Plastics piping systems for industrial applications -- Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) -- Specifications for components and the system -- Metric series
ISO 15494:2015 Plastics piping systems for industrial applications -- Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) -- Metric series for specifications for components and the system
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads -- Part 1: Dimensions, tolerances and designation
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads -- Part 1: Dimensions, tolerances and designation
ISO 7-1:1994/Cor 1:2007
ISO 8659:1989 Thermoplastics valves -- Fatigue strength -- Test method
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
ISO 9393-2:2005 Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements
ISO/TR 10358:1993 Plastics pipes and fittings -- Combined chemical-resistance classification table

Tekninen komitea

CEN/TC 69 Industrial valves »

Direktiivi

97/23/EC Painelaitteet
2014/68/EU

http://ec.europa.eu »

Vahvistuspäivä

25.09.2006

Julkaisupäivä

13.10.2006

Painos

1

Sivumäärä

18

Julkaisun kieli

englanti