1.1 This standard contains the requirements for the design and installation of glass presses including equipment for feeding of portions of molten glass to the mould, loading equipment and equipment for discharging articles (take-out) when these are integral parts of the presses. 1.2 !This standard deals with all significant hazards, hazardous situations and events relevant to glass presses when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks from the significant hazards commissioning, operation and maintenance." 1.3 This standard does not deal with forming machines for hollow glass where the press operation is only a part of the hot-forming process, such as the press/blow process of IS machines (see !EN 13042-3"). 1.4 This standard does not deal with gob feeders (see !EN 13042-1") and handling machines for feeding (see !EN 13042-2") which are self-standing machines and dealt with in other standards of the series regarding machinery used in the production of hollow glass. 1.5 This document is not applicable to presses which are manufactured before the date of publication of this document by CEN. 1.6 This standard deals only with hazards arising from the application of components which may be used in glass presses, such as motors and continuous handling equipment. More particular safety requirements are dealt with within standards more specific to that component, including noise. 1.7 This standard does not deal with equipment for cooling and waste ejection with air or heating from an outside system.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
EN 1037:1995 Safety of machinery - Prevention of unexpected start-up
EN 12464-1:2002 Light and lighting - Lighting of work places - Part 1: Indoor work places
EN 349:1993 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 1037:1995 Safety of machinery - Prevention of unexpected start-up
EN 12464-1:2002 Light and lighting - Lighting of work places - Part 1: Indoor work places
EN 349:1993 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 61508-5:2010 Sähköisten/elektronisten/ohjelmoitavien elektronisten turvallisuuteen liittyvien järjestelmien toiminnallinen turvallisuus. Osa 5: Esimerkkejä menetelmistä turvallisuuden eheyden tasojen määrittämiseksi
EN 953:1997 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 982:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 983:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN ISO 11201:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995)
EN ISO 11202:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)
EN ISO 11204:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995)
EN ISO 11688-1:1998 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003)
EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003)
EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006)
EN ISO 13850:2008 Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)
EN ISO 4871:1996 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
ISO 8598:1996 Optics and optical instruments -- Focimeters