This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal. The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPA (750 mbar) absolute, i.e. vacuum cleaners, ventilation fans). Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
EN 1070:1998 Safety of machinery - Terminology
EN 1127-1:2019 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 294:1992 Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs
EN 1070:1998 Safety of machinery - Terminology
EN 1127-1:2019 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 294:1992 Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs
EN 60204-1:1992 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 61310-1:2008 Koneturvallisuus. Merkinantaminen, merkitseminen ja vaikuttaminen. Osa 1: Näköön, kuuloon ja tuntoon perustuvia signaaleja koskevat vaatimukset
EN IEC 60079-0:2018 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset
EN IEC 61000-6-2:2019 Sähkömagneettinen yhteensopivuus (EMC). Osa 6-2: Yleiset standardit. Häiriönsieto teollisuusympäristöissä
EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003)
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN ISO 14120:2015 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)
EN ISO 2151:2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)
IEC 60417:1973
IEC 61010-1:2001
ISO 3266:1984 Eyebolts for general lifting purposes
ISO 3529-1:1981 Vacuum technology -- Vocabulary -- Part 1: General terms
ISO 3529-2:1981 Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms
ISO 3529-3:1981 Vacuum technology -- Vocabulary -- Part 3: Vacuum gauges
ISO 4126-1:2004 Safety devices for protection against excessive pressure -- Part 1: Safety valves
ISO 4871:1996 Acoustics -- Declaration and verification of noise emission values of machinery and equipment
ISO 7000:2004 Graphical symbols for use on equipment -- Index and synopsis
ISO/TR 11688-1:1995 Acoustics -- Recommended practice for the design of low-noise machinery and equipment -- Part 1: Planning