This document specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of nitrogen or oxygen units when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE), manufacturers as well as airlines and handling agencies. This document applies to: - all types of mobile nitrogen units and oxygen units with transportable gas cylinders interchangeable for filling purposes; - equipment to be carried with other GSE or vehicles, e.g. skid mounted units, intended for the manual refill of gaseous nitrogen or oxygen on aircraft (Examples see Annex A). NOTE Generally oxygen units are used under aircraft maintenance conditions, not under commercial servicing conditions. This document does not establish requirements for noise and vibration. Noise and vibration are dealt with respectively in EN 1915 4 and EN 1915 3. This document does not deal with hazards in respect to a standard automotive chassis and from other vehicles on the apron. This Part of EN 12312 is not applicable to nitrogen or oxygen units which are manufactured before the date of publication of this document by CEN. This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
EN 1050:1996 Safety of machinery - Principles for risk assessment
EN 1175:2020 Safety of industrial trucks - Electrical/electronic requirements
EN 1915-1:2001 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1050:1996 Safety of machinery - Principles for risk assessment
EN 1175:2020 Safety of industrial trucks - Electrical/electronic requirements
EN 1915-1:2001 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1915-2:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
EN 1915-3:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction
EN 1915-4:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction
EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
EN ISO 10297:2014 Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01)
EN ISO 10297:2024 Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2024)
EN ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003)
EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003)
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 9809-1:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa (ISO 9809-1:2019)
EN ISO 9809-3:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 3: Normalized steel cylinders and tubes (ISO 9809-3:2019)