SFS-EN ISO 10058-2:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

ISO 10058-2:2008 specifies traditional (“wet process”) methods for the chemical analysis of magnesite and dolomite refractory products and raw materials.

Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).

Sisällysluettelo

Foreword
1 Scope
2 Normative references
3 Determination of silicon(IV) oxide

3.1 General
3.2 Combined use of the coagulation and molybdenum blue methods
3.3 Molybdenum blue method

4 Determination of aluminium oxide

4.1 Principle
4.2 Procedure
4.3 Blank test
4.4 Calculation

5 Determination of iron(III) oxide

5.1 Principle
5.2 Procedure
5.3 Blank test
5.4 Plotting of calibration graph
5.5 Calculation

6 Determination of titanium(IV) oxide

6.1 Principle
6.2 Procedure
6.3 Blank test
6.4 Plotting of calibration graph
6.5 Calculation

7 Determination of manganese(II) oxide

7.1 Principle
7.2 Procedure
7.3 Blank test
7.4 Plotting of calibration graph
7.5 Calculation

8 Determination of calcium oxide

8.1 Principle
8.2 Procedure
8.3 Blank test
8.4 Calculation

9 Determination of magnesium oxide

9.1 Principle
9.2 Procedure
9.3 Blank test
9.4 Calculation

10 Determination of sodium oxide by flame photometry

10.1 Principle
10.2 Reagents
10.3 Procedure
10.4 Blank test
10.5 Plotting of calibration graph
10.6 Calculation

11 Determination of potassium oxide by flame spectrophotometry

11.1 Principle
11.2 Procedure
11.3 Blank test
11.4 Plotting of calibration graph
11.5 Calculation

12 Determination of chromium(III) oxide

12.1 General
12.2 Diphenylcarbazide method
12.3 EDTA method

13 Determination of zirconium oxide by xylenol orange absorption spectroscopy

13.1 Principle
13.2 Procedure
13.3 Blank test
13.4 Plotting of calibration graph
13.5 Calculation

14 Determination of phosphorus(V) oxide by molybdenum blue method

14.1 Principle
14.2 Procedure
14.3 Blank test
14.4 Plotting of calibration graph
14.5 Calculation

15 Test report

Näytä kaikki

Foreword
1 Scope
2 Normative references
3 Determination of silicon(IV) oxide

3.1 General
3.2 Combined use of the coagulation and molybdenum blue methods
3.3 Molybdenum blue method

4 Determination of aluminium oxide

4.1 Principle
4.2 Procedure
4.3 Blank test
4.4 Calculation

5 Determination of iron(III) oxide

5.1 Principle
5.2 Procedure
5.3 Blank test
5.4 Plotting of calibration graph
5.5 Calculation

6 Determination of titanium(IV) oxide

6.1 Principle
6.2 Procedure
6.3 Blank test
6.4 Plotting of calibration graph
6.5 Calculation

7 Determination of manganese(II) oxide

7.1 Principle
7.2 Procedure
7.3 Blank test
7.4 Plotting of calibration graph
7.5 Calculation

8 Determination of calcium oxide

8.1 Principle
8.2 Procedure
8.3 Blank test
8.4 Calculation

9 Determination of magnesium oxide

9.1 Principle
9.2 Procedure
9.3 Blank test
9.4 Calculation

10 Determination of sodium oxide by flame photometry

10.1 Principle
10.2 Reagents
10.3 Procedure
10.4 Blank test
10.5 Plotting of calibration graph
10.6 Calculation

11 Determination of potassium oxide by flame spectrophotometry

11.1 Principle
11.2 Procedure
11.3 Blank test
11.4 Plotting of calibration graph
11.5 Calculation

12 Determination of chromium(III) oxide

12.1 General
12.2 Diphenylcarbazide method
12.3 EDTA method

13 Determination of zirconium oxide by xylenol orange absorption spectroscopy

13.1 Principle
13.2 Procedure
13.3 Blank test
13.4 Plotting of calibration graph
13.5 Calculation

14 Determination of phosphorus(V) oxide by molybdenum blue method

14.1 Principle
14.2 Procedure
14.3 Blank test
14.4 Plotting of calibration graph
14.5 Calculation

15 Test report

Tuoteryhmä(t)

81.080 Tulenkestävät aineet »
73.080 Muut kuin metallimineraalit »

Sidokset

Velvoittavat viittaukset

ISO 10058-1:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) -- Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) -- Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
ISO 26845:2008 Chemical analysis of refractories -- General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods

Tekninen komitea

CEN/TC 187 Refractory products and materials »

Vahvistuspäivä

25.01.2010

Julkaisupäivä

12.02.2010

Painos

1

Sivumäärä

23

Julkaisun kieli

englanti