Verkkokauppa
SFS-EN ISO 26945:en
Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011)
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
ISO 26945:2011 specifies electrodeposited coatings of tin-cobalt alloy of approximate composition 75 % (mass fraction) to 80 % (mass fraction) tin, remainder cobalt, as a substitute for decorative chromium coatings of 0,1 µm to 0,3 µm thickness. Hardness and wear resistance properties of the coatings obtained are not equivalent to those of chromium coatings, but similar to those of tin-nickel alloy coatings.
Tin-cobalt alloy coatings can be applied by rack or barrel plating processes.
ISO 26945:2011 does not specify requirements for the surface condition of the basis metal prior to electroplating.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
ISO 26945:2011 specifies electrodeposited coatings of tin-cobalt alloy of approximate composition 75 % (mass fraction) to 80 % (mass fraction) tin, remainder cobalt, as a substitute for decorative chromium coatings of 0,1 µm to 0,3 µm thickness. Hardness and wear resistance properties of the coatings obtained are not equivalent to those of chromium coatings, but similar to those of tin-nickel alloy coatings.
Tin-cobalt alloy coatings can be applied by rack or barrel plating processes.
ISO 26945:2011 does not specify requirements for the surface condition of the basis metal prior to electroplating.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
ISO 10289:1999 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests
ISO 10587:2000 Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method
ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
ISO 10587:2000 Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method
ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
Tekninen komitea
Vahvistuspäivä
28.03.2011
Julkaisupäivä
15.04.2011
Painos
2
Sivumäärä
14
Julkaisun kieli
englanti