ISO 9224:2012 specifies guiding values of corrosion attack for metals and alloys exposed to natural outdoor atmospheres for exposures greater than one year. It is intended to be used in conjunction with ISO 9223. Guiding corrosion values for standard structural materials can be used for engineering calculations. The guiding corrosion values specify the technical content of each of the individual corrosivity categories for these standard metals. ISO 9224:2012 provides examples of calculated maximum corrosion attack after extended exposure (up to 20 years) for six standardized corrosivity categories. It provides presumed average initial and steady-state corrosion rates of standard metals in intervals relative to six standardized corrosivity categories. It provides the calculation procedure for corrosion attack of steels in regard to their composition.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Prediction of corrosion attack after extended exposure
6 Specific criteria for calculation of corrosion rates of structural metals
6.1 Steels
6.2 Zinc materials
6.3 Copper alloys
6.4 Aluminium alloys
7 Long-term exposures
Annex A Example of maximum corrosion attack after extended exposures for corrosivity categories (informative)
Annex B Average initial corrosion rates and average steady corrosion rates in intervals relative to classified corrosivity categories (informative)
Annex C Prediction of corrosion attack of steels with regard to steel composition (informative)
ISO 8044:1999 Corrosion of metals and alloys -- Basic terms and definitions
ISO 9223:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification, determination and estimation
ISO 8044:1999 Corrosion of metals and alloys -- Basic terms and definitions
ISO 9223:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification, determination and estimation