ISO 14890:2013 specifies requirements for rubber and/or plastics covered conveyor belting of textile construction for general surface use on flat or troughed idlers. ISO 14890:2013 is not suitable or valid for light conveyor belts as described in ISO 21183-1. Items that are not requirements of ISO 14890:2013, but need to be agreed between the manufacturer and the purchaser, as well as a list of the details intended to be supplied by the purchaser of belting with an enquiry are included in the annexes.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
4.1 Belting designation
4.2 Examples for ordering
5 Construction
6 Length
7 Width
8 Rubber cover
9 Tolerances on total belt thickness and cover thickness
9.1 Tolerance on total belt thickness
9.2 Tolerance on cover thickness
10 Transverse fabric joints in multi-ply belting
10.1 General
10.2 Outer plies
10.3 Inner plies
10.4 Adjacent plies and non-adjacent plies
10.5 Joints in the same ply
10.6 Mono-ply, duo-ply and solid woven belting
11 Longitudinal fabric joints in multi-ply belting and duo-ply belting
11.1 Spacing of joints
11.2 Number of joints
12 Longitudinal fabric or carcass joints in solid woven and mono-ply belting
13 Elongation
14 Full thickness tensile strength
15 Adhesion
16 Troughability
17 Sampling
18 Identification
Annex A Items to be agreed between the manufacturer and purchaser (informative)
Annex B Helpful information to be supplied by the purchaser (informative)
Annex C Lateral drift — Straight running (informative)
EN 12882:2015 Conveyor belts for general purpose use - Electrical and flammability safety requirements
ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
ISO 16851:2012 Textile conveyor belts -- Determination of the net length of an endless (spliced) conveyor belt
EN 12882:2015 Conveyor belts for general purpose use - Electrical and flammability safety requirements
ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
ISO 16851:2012 Textile conveyor belts -- Determination of the net length of an endless (spliced) conveyor belt
ISO 188:2011 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests
ISO 252:2007 Conveyor belts -- Adhesion between constitutive elements -- Test methods
ISO 282:1992 Conveyor belts -- Sampling
ISO 283:2007 Textile conveyor belts -- Full thickness tensile strength, elongation at break and elongation at the reference load -- Test method
ISO 37:2011 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
ISO 4649:2010 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device
ISO 583:2007 Conveyor belts with a textile carcass -- Total belt thickness and thickness of constitutive elements -- Test methods
ISO 703:2007 Conveyor belts -- Transverse flexibility (troughability) -- Test method