SFS-EN 14227-3:en

Soveltamisala

Suomenkielistä soveltamisalaa ei ole saatavissa.

This European Standard specifies fly ash bound granular mixtures for roads, airfields and other trafficked areas, and specifies the requirements for their constituents, composition and laboratory performance classification.
In this European Standard, fly ash refers to siliceous or calcareous fly ash complying with EN 14227-4. Where fly ash is part of cement conforming to EN 197-1 or hydraulic road binder conforming to EN 13282-1 and EN 13282-2, then reference should be made to EN 14227-1 or EN 14227-5 respectively.

Tämän julkaisun valmistelusta Suomessa vastaa Väylä, puh. 0295 343000 (vaihde).

Tuoteryhmä(t)

93.080.20 Tienrakennusmateriaalit »

Sidokset

Velvoittavat viittaukset

EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method

EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 13242:2002 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13242:2013 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
EN 13286-1:2021 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
EN 13286-41:2003 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-41:2021 Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
EN 13286-42:2003 Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
EN 13286-45:2003 Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures
EN 13286-47:2012 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
EN 13286-47:2021 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
EN 13286-4:2021 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
EN 13286-50:2004 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
EN 13286-51:2004 Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
EN 13286-52:2004 Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression
EN 13286-53:2004 Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression
EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table
EN 14227-2:2013 Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures
EN 14227-4:2013 Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 459-1:2015 Building lime - Part 1: Definitions, specifications and conformity criteria
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

Tekninen komitea

CEN/TC 227 Road materials »

Vahvistuspäivä

17.06.2013

Julkaisupäivä

05.07.2013

Painos

2

Sivumäärä

36

Julkaisun kieli

englanti