Tämä eurooppalainen asiakirja käsittelee harvasta kevytrunkoainebetonista valmistettuja rakenteellisesti tai ei-rakenteellisesti raudoitettuja elementtejä, joita käytetään rakennuksissa a) rakenteellisina elementteinä: — kantavina seinäelementteinä (umpielementit, onteloelementit tai monikerroselementit) — tukimuurielementteinä (umpielementit) ilman mitoitusta täyttömaan tiivistämiskuormille tai mitoitettuna täyttömaan tiivistämiskuormille — kattoelementteinä (umpielementit, onteloelementit tai monikerroselementit) — lattiaelementteinä (umpielementit, onteloelementit tai monikerroselementit) — lineaarielementteinä (palkit ja pilasterit). b) ei-rakenteellisina elementteinä: — ei-kantavina seinäelementteinä (esim. väliseininä) — verhouselementteinä (ilman kiinnikkeitä), jotka on tarkoitettu käytettäviksi rakennusten julkisivuissa — pieninä kanaalielementteinä, jotka on tarkoitettu muodostamaan putki- ja kaapelikanavia — melueste-elementteinä. HUOM. 1 Elementtejä voidaan kantavan ja peittävän tehtävänsä lisäksi käyttää parantamaan palonkestävyyttä, ääneneristävyyttä ja lämmöneristävyyttä. Tämän standardin mukaiset elementit on tarkoitettu käytettäviksi pääasiassa ei-dynaamisille kuormituksille, ellei tämän eurooppalaisen standardin kysymykseen tulevissa kohdissa ole esitetty erityisiä toimenpiteitä. Termi "raudoitettu" viittaa raudoitukseen, jota käytetään sekä rakenteellisissa että ei-rakenteellisissa tarkoituksissa. Tämä eurooppalainen standardi ei koske: — elementtien käyttöön liittyviä sääntöjä rakenteissa — liitoksia (lukuun ottamatta niiden lujuutta) — kiinnikkeitä — ulkoelementtien pinnoittamista, esim. päällystämistä verhouslaatoilla. HUOM. 2 Harvasta kevytrunkoainebetonista valmistettuja rakenteellisesti tai ei-rakenteellisesti raudoitettuja elementtejä voidaan käyttää meluesteinä, jos ne suunnitellaan täyttämään myös standardin EN 14388 vaatimukset.
Tämän julkaisun valmistelusta Suomessa vastaa Rakennustuoteteollisuus RTT ry, puh. 09 12 991 (vaihde).
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-2:2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-2:2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
EN 13055:2016 Lightweight aggregates
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 13501-2:2023 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
EN 1352:1996 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure
EN 1355:1996 Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1356:1996 Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load
EN 1364-1:2015 Fire resistance tests for non-loadbearing elements - Part 1: Walls
EN 1365-1:2012 Fire resistance tests for loadbearing elements - Part 1: Walls
EN 1365-2:2014 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
EN 1365-3:1999 Fire resistance tests for loadbearing elements - Part 3: Beams
EN 1365-4:1999 Fire resistance tests for loadbearing elements - Part 4: Columns
EN 1521:1996 Determination of flexural strength of lightweight aggregate concrete with open structure
EN 1739:2007 Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1740:1998 Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)
EN 1741:1998 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1742:1998 Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1745:2020 Masonry and masonry products - Methods for determining thermal properties
EN 1793-1:2017 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
EN 1793-2:2018 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
EN 1992-1-1:2004 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
EN 1992-1-1:2023 Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
EN 206-1:2000 Concrete - Part 1: Specification, performance, production and conformity
EN 990:2002 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
EN 991:1995 Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 992:1995 Determination of the dry density of lightweight aggregate concrete with open structure
EN ISO 10140-1:2016 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016)
EN ISO 10140-1:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2021)
EN ISO 10140-2:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010)
EN ISO 10140-2:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2021)
EN ISO 10140-3:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010)
EN ISO 10140-3:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)
EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
EN ISO 10140-5:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)
EN ISO 10140-5:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2021)
EN ISO 10456:2007 Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)
EN ISO 1182:2020 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2020)
EN ISO 12354-1:2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017)
EN ISO 12354-2:2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO 12354-2:2017)
EN ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
EN ISO 15148:2002 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002)
EN ISO 1716:2018 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018)
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 6946:2017 Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017)
EN ISO 717-1:2020 Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2020)
EN ISO 717-2:2020 Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2020)
ISO 80000-1:2009 Quantities and units -- Part 1: General