ISO 14554-1:2013 specifies requirements for the demonstration of the capability of a manufacturer or a sub-contractor to produce welded constructions, fulfilling specified quality requirements, in one or more of the following: a) a contract between involved parties; b) an application standard; c) a regulatory requirement. The requirements contained within ISO 14554-1:2013 can be adopted in full or can be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of welding by providing specific requirements for: 1) Case 1 ? resistance welding in contracts which require the manufacturer or sub-contractor to have a quality system in accordance with ISO 9001; 2) Case 2 ? resistance welding in contracts which require the manufacturer or sub-contractor to have a quality system other than ISO 9001; 3) Case 3 ? resistance welding as guidance to a manufacturer or sub-contractor developing a quality system; 4) Case 4 ? references in application standards which use resistance welding as part of their requirements or in a contract between relevant parties, although it is more appropriate for ISO 14554-2 to be used in such cases. ISO 14554-1:2013: i) is independent of the type of welded construction to be manufactured; ii) defines quality requirements for welding both in production plants and on site; iii) provides guidance for describing the capability of a manufacturer to produce welded constructions to meet specified requirements; iv) can also be used as a basis for assessing the manufacturer in respect to his welding capability. For general guidelines for selection and use, see ISO 3834-1, while being aware that only comprehensive and elementary quality requirements are specified for resistance welding. An annex gives a summary comparison of specific quality requirements for resistance welding in ISO 14554-1:2013 and ISO 14554-2.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Contract and design review
4.1 General
4.2 Application — Contract review
4.3 Application — Design review
5 Sub-contracting
6 Welding personnel
6.1 General
6.2 Operators
6.3 Resistance weld setter
6.4 Welding coordinator
7 Inspection, testing, and examination personnel
8 Equipment
8.1 Production and testing facilities
8.2 Description of facilities
8.3 Approval of facilities
8.4 Installation of new or refurbished equipment
8.5 Maintenance
9 Welding activities
9.1 Production planning
9.2 Welding procedure specification
9.3 Welding procedure approval
9.4 Work instructions
9.5 Documentation
10 Welding electrodes and auxiliaries
10.1 General
10.2 Batch testing
10.3 Welding electrodes
10.4 Marking of the welding electrodes
11 Storage of parent metal
12 Heat treatment
13 Weld-related inspection and testing
13.1 General
13.2 Inspection and testing before welding
13.3 Inspection and testing during production
13.4 Inspection and testing after welding
13.5 Inspection and test status
14 Non-conformance and corrective action
15 Calibration
16 Identification and traceability
17 Quality records
Annex A Summary comparison of welding quality requirements in this part of ISO 14554 and ISO 14554-2 (informative)
ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials -- Part 1: Criteria for the selection of the appropriate level of quality requirements
ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials -- Part 1: Criteria for the selection of the appropriate level of quality requirements