Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
ISO 21809-2:2014 specifies the requirements for qualification, application, testing and handling of materials for plant application of single layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
4.1 Symbols
4.2 Abbreviated terms
5 General requirements
5.1 Rounding
5.2 Compliance to standard
6 Information supplied by the purchaser
6.1 General information
6.2 Additional information
7 Coating materials
7.1 Epoxy powder
7.2 Repair materials
8 Coating qualification
8.1 Qualification by manufacturer
8.2 Qualification by applicator
9 Application of coating
9.1 General
9.2 Surface preparation
9.3 Coating application and curing temperature
9.4 Coating thickness
9.5 Cutback
10 Inspection and testing
10.1 General
10.2 Testing of incoming epoxy powder
10.3 In-process and finished product testing requirements
10.4 Test results
11 Repair of coated pipe
11.1 General
11.2 Repair of holidays
11.3 Stripping and recoating
12 Markings
12.1 General
12.2 Required markings
13 Handling and storage in the coating area
13.1 Handling
13.2 Storage
14 Test reports and inspection documents
Annex A Test methods (normative)
Annex B Procedure qualification trial (PQT), inspection and testing plan (ITP) and daily log (normative)
AS 3894.6:2002
ASTM D 4060:2010 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 4940:2010 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
AS 3894.6:2002
ASTM D 4060:2010 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 4940:2010 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
EN 10204:2004 Metallic products - Types of inspection documents
ISO 10474:2013 Steel and steel products -- Inspection documents
ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification
ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit
ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit
ISO 11124-4:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot
ISO 11126-1 Technical Corrigendum 1:1997
ISO 11126-1 Technical Corrigendum 2:1997
ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet
ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification
ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag
ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag
ISO 11126-5:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag
ISO 11126-6:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag
ISO 11126-7 Technical Corrigendum 1:1999
ISO 11126-7:1995 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide
ISO 11126-8:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand
ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite
ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement
ISO 11357-1:2009 Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles
ISO 13623:2009 Petroleum and natural gas industries -- Pipeline transportation systems
ISO 2815:2003 Paints and varnishes -- Buchholz indentation test
ISO 80000-1:2009 Quantities and units -- Part 1: General
ISO 8130-2:1992 Coating powders -- Part 2: Determination of density by gas comparison pyknometer (referee method)
ISO 8130-3:1992 Coating powders -- Part 3: Determination of density by liquid displacement pyknometer
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 8502-3:1992 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method
ISO 8502-9:1999
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Stylus instrument procedure
ISO 8503-5:2003 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 5: Replica tape method for the determination of the surface profile
SSPC-AB 1:1991
SSPC-AB 2:1996
SSPC-AB 3:2003
SSPC-SP 1:1982