Tämän eurooppalaisen standardin tämä osa määrittelee tekniset toimitusehdot kuumamuovatuille pyöreille, neliön, suorakaiteen tai ellipsin muotoisille rakenneputkille, jotka on valmistettu joko kuumamuovaamalla tai kuumamuovaamalla ja lisälämpökäsittelyllä tai kylmämuovaamalla ja lisälämpökäsittelyllä siten, että rakenneputken metallurgiset ominaisuudet vastaavat kuumamuovatun tuotteen metallurgisia ominaisuuksia. Toleransseja, mittoja ja poikkileikkaussuureita koskevat vaatimukset esitetään standardissa EN 10210‑2. HUOM. Tässä eurooppalaisessa standardissa määritellään useita teräslajeja, ja käyttäjän on valittava käyttökohteeseen ja -olosuhteisiin soveltuva teräslaji. Teräslajit ja mekaaniset ominaisuudet ovat vastaavat kuin standardeissa EN 10025–2 ja EN 10025–3.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Esipuhe
1 Soveltamisala
2 Velvoittavat viittaukset
3 Termit, määritelmät ja tunnukset
3.1 Termit ja määritelmät
3.2 Tunnukset
4 Laatuluokat ja nimike
4.1 Laatuluokat
4.2 Nimike
5 Valmistajan tarvitsemat tiedot
5.1 Pakolliset tiedot
5.2 Optiot
5.3 Esimerkki tilauksesta
6 Vaatimukset
6.1 Yleistä
6.2 Teräksen valmistus
6.3 Rakenneputkien valmistusmenetelmä
6.4 Toimitustila
6.5 Kemiallinen koostumus
6.6 Mekaaniset ominaisuudet
6.7 Teknologiset ominaisuudet
6.8 Pinnan laatu
6.9 Hitsin rikkomaton aineenkoetus
6.10 Toleranssit ja massa
7 Tarkastus
7.1 Tarkastustavat
7.2 Ainestodistustyypit
7.3 Yhteenveto tarkastuksesta
8 Näytteenotto
8.1 Testaustaajuus
8.2 Näytteiden ja koekappaleiden valmistus
9 Aineenkoetusmenetelmät
9.1 Kemiallisen koostumuksen määritys
9.2 Rikkova aineenkoetus
9.3 Silmämääräinen tarkastus ja mittojen tarkastus
9.4 Rikkomaton aineenkoetus
9.5 Uusintakokeet, lajittelu ja uusi tuotantokäsittely
10 Merkintä
11 Vaatimustenmukaisuuden arviointi
Liite A Seostamattomista laatuteräksistä valmistetut rakenneputket. Kemiallinen koostumus ja mekaaniset ominaisuudet (velvoittava)
Liite B Hienoraeteräksistä valmistetut rakenneputket. Kemiallinen koostumus ja mekaaniset ominaisuudet (velvoittava)
Liite C Näytteiden ja koesauvojen sijainti (velvoittava)
Liite D Vaatimustenmukaisuuden arviointi (velvoittava)
Liite ZA Tämän eurooppalaisen standardin kohdat, jotka liittyvät EU:n rakennustuotedirektiiviin (opastava)
CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
EN 10020:2000 Definition and classification of grades of steel
EN 10021:1993 General technical delivery requirements for steel and iron products
EN 10027-1:2005 Designation systems for steels - Part 1: Steel names
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
EN 10256:2000 Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
EN ISO 10893-3:2011 Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011)
EN ISO 10893-6:2019 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 14284:2022 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022)
EN ISO 15607:2019 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019)
EN ISO 15609-1:2019 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
EN ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN ISO 2566-1:2021 Steel - Conversion of elongation values - Part 1: Carbon and low-alloy steels (ISO 2566-1:2021)
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 9001:2000 Quality management systems - Requirements (ISO 9001:2000)
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)