Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on noin 3 - 5 työpäivää
This European Standard covers the oil-immersed single-phase connection assembly of cables for transformers and reactors, designed in accordance with EN 60076 series. NOTE In the standard the term "transformer" is used as common definition for transformer and reactor. The purpose of EN 50299-1 is to establish for the cable assemblies: - the electrical and mechanical requirements, including interchangeability; - the limits of supply; - the test to be carried out. It complements and amends, if necessary, the relevant IEC standards and applies to oil immersed cable connections, suitable for fluid-filled or dry-type cable terminations. EN 50299-1 does not cover direct cable terminations (see 3.1.1.3), but, in this case, upon agreement between purchaser and supplier, the standard may be used for guidance except for Figure 1 and Figure 2 which are not applicable. This standard applies to oil-immersed cable connection boxes on transformers with highest voltage for equipment Um = 72,5 kV to 550 kV, including the current conductor terminal at the cable sealing end of the transformer.
Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.
EN 60076-10:2001 Power transformers - Part 10: Determination of sound levels
EN 60076-10:2016 Power transformers - Part 10: Determination of sound levels
EN 60076-11:2004 Power transformers - Part 11: Dry-type transformers
EN 60076-10:2001 Power transformers - Part 10: Determination of sound levels
EN 60076-10:2016 Power transformers - Part 10: Determination of sound levels
EN 60076-11:2004 Power transformers - Part 11: Dry-type transformers
EN 60076-13:2006 Power transformers - Part 13: Self-protected liquid-filled transformers
EN 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
EN 60076-16:2011 Power transformers - Part 16: Transformers for wind turbines applications
EN 60076-18:2012 Power transformers - Part 18: Measurement of frequency response
EN 60076-19:2015 Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
EN 60076-1:2011 Power transformers - Part 1: General
EN 60076-2:1997 Power transformers - Part 2: Temperature rise
EN 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
EN 60076-3:2001 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
EN 60076-3:2013 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
EN 60076-3:2013/A1:2018 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
EN 60076-4:2002 Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
EN 60076-5:2000 Power transformers - Part 5: Ability to withstand short circuit
EN 60076-5:2006 Power transformers - Part 5: Ability to withstand short-circuit
EN 60076-6:2008 Power transformers - Part 6: Reactors
EN IEC 60296:2020 Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment
EN ISO 1302:2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002)
EN ISO 21920-1:2022 Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
HD 632 S3:2016 Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV)
IEC 60141-1:1993 Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV
IEC 60840:2011 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
IEC 62067:2001 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements