ISO 17228:2015 specifies various ageing procedures to obtain an indication of the changes that could occur when leather is exposed to a certain environment for a prolonged time. Over time, the surface colour of leather and the leather itself change due to ageing and to the action of the surroundings on the leather. The test conditions to be used depend on the type of leather and its intended use. This procedure can also be used to age specimens for the test of dimensional change according to ISO 17130.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
Sisällysluettelo
Foreword
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Test specimens
6 Ageing by heat alone
6.1 Principle
6.2 Procedure
7 Ageing by heat and elevated humidity
7.1 Principle
7.2 Procedure
8 Cyclic variation in heat and elevated humidity
8.1 Principle
8.2 Procedure
9 Test report
Annex A Comments on specific aspects of the colour-measurement procedure (informative)
ISO 105-A01:2010 Textiles -- Tests for colour fastness -- Part A01: General principles of testing
ISO 105-A02:1993 Textiles -- Tests for colour fastness -- Part A02: Grey scale for assessing change in colour
ISO 105-A03:1993 Textiles -- Tests for colour fastness -- Part A03: Grey scale for assessing staining
ISO 105-A01:2010 Textiles -- Tests for colour fastness -- Part A01: General principles of testing
ISO 105-A02:1993 Textiles -- Tests for colour fastness -- Part A02: Grey scale for assessing change in colour
ISO 105-A03:1993 Textiles -- Tests for colour fastness -- Part A03: Grey scale for assessing staining
ISO 105-A04:1989 Textiles -- Tests for colour fastness -- Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
ISO 105-A05:1996 Textiles -- Tests for colour fastness -- Part A05: Instrumental assessment of change in colour for determination of grey scale rating
ISO 17130:2013 Leather - Physical and mechanical tests - Determination of dimensional change
ISO 2418:2002 Leather -- Chemical, physical and mechanical and fastness tests -- Sampling location
ISO 2419:2012 Leather -- Physical and mechanical tests -- Sample preparation and conditioning