IEC 60092-507:2014 specifies requirements for the design, construction and installation of electrical systems in small vessels, which have a length of up to 50 m, or which have a gross tonnage not exceeding 500 Gross Tonnes (GT), designed for use on inland waters or at sea. It is not intended to apply to:
a) small craft equipped only with a battery supplying circuits for engine starting and navigation lighting recharged from an inboard or outboard engine driven alternator.
b) recreational craft of less than 24 m hull length requiring to conform to the Recreational Craft Directive 94/25/EC Annex 1 Essential Requirements Part 5.3 Electrical systems, except for three-phase alternating current installations in such recreational craft which operate at a nominal voltage not exceeding AC 500 V. This third edition includes the following significant technical changes with respect to the previous edition:
a) The standard now clarifies its application for electrical installations in those recreational craft which require to conform to the Recreational Craft Directive.
b) The standard specifies requirements for methods of galvanic isolation for small vessels and recreational craft connecting to a low voltage AC shore supply.
c) The standard includes design guidance for electric propulsion systems suitable for small vessels and associated installation requirements.
Tämän julkaisun valmistelusta Suomessa vastaa SESKO ry, puh. 050 571 6048.
EN 60079-0:2004 Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
EN 60079-0:2006 Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
EN 60079-0:2009 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset
EN 60079-0:2004 Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
EN 60079-0:2006 Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
EN 60079-0:2009 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleiset vaatimukset
EN 60079-0:2012 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleisvaatimukset
EN 60079-0:2012/A11:2013 Räjähdysvaaralliset tilat. Osa 0: Laitteet. Yleisvaatimukset
EN 60079-10:1996 Räjähdysvaarallisten tilojen sähkölaitteet. Osa 10: Räjähdysvaarallisten tilojen luokittelu
EN 60079-10:2003 Kaasuräjähdysvaarallisten tilojen sähkölaitteet. Osa 10: Räjähdysvaarallisten tilojen luokittelu
EN 60079-11:2007 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN 60079-13:2010 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p"
EN 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
EN 60079-14:1997 Räjähdysvaarallisten tilojen sähkölaitteet.Osa 14:Räjähdysvaarallisten tilojen sähköasennukset (ei koske kaivoksia)
EN 60079-14:2003 Kaasuräjähdysvaarallisten tilojen sähkölaitteet. Osa 14: Räjähdysvaarallisten tilojen sähköasennukset (ei koske kaivoksia)
EN 60079-14:2008 Räjähdysvaaralliset tilat. Osa 14: Sähköasennusten suunnittelu, laitevalinta ja asentaminen
EN 60079-14:2014 Räjähdysvaaralliset tilat. Osa 14: Sähköasennusten suunnittelu, laitevalinta ja asentaminen
EN 60079-15:2003 Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection "n"
EN 60079-15:2005 Electrical apparatus for explosive gas atmospheres - Part 15: Construction, test and marking of type of protection "n" electrical apparatus
EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 60079-17:1997 Electrical apparatus for explosive gas atmospheres - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
EN 60079-17:2003 Kaasuräjähdysvaarallisten tilojen sähkölaitteet. Osa 17: Räjähdysvaarallisten tilojen sähköasennusten tarkastus ja kunnossapito (Ei koske kaivoksia)
EN 60079-17:2007 Räjähdysvaaralliset tilat. Osa 17: Sähköasennusten tarkastus ja kunnossapito
EN 60079-17:2014 Räjähdysvaaralliset tilat. Osa 17: Sähköasennusten tarkastus ja kunnossapito
EN 60079-18:2004 Electrical apparatus for explosive gas atmospheres - Part 18: Construction, test and marking of type of protection encapsulation "m" electrical apparatus
EN 60079-18:2009 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
EN 60079-18:2015 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
EN 60079-18:2015/A1:2017 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
EN 60079-19:2007 Räjähdysvaaralliset tilat. Osa 19: Laitteiden korjaus, huolto ja paikkaus
EN 60079-19:2011 Räjähdysvaaralliset tilat. Osa 19: Laitteiden korjaus, huolto ja paikkaus
EN 60079-19:2011/A1:2015 Räjähdysvaaralliset tilat. Osa 19: Laitteiden korjaus, huolto ja paikkaus
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60079-1:2014/A11:2024 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60079-25:2004 Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically safe systems
EN 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
EN 60079-26:2004 Electrical apparatus for explosive gas atmospheres - Part 26: Construction, test and marking of Group II Category 1 G electrical apparatus
EN 60079-26:2007 Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga
EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 60079-27:2006 Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)
EN 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
EN 60079-28:2007 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
EN 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
EN 60079-28:2015/A11:2024 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
EN 60079-2:2004 Electrical apparatus for explosive gas atmospheres - Part 2: Pressurized enclosures "p"
EN 60079-2:2007 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
EN 60079-2:2014 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
EN 60079-31:2009 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 60079-5:2007 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
EN 60079-6:2007 Explosive atmospheres - Part 6: Equipment protection by oil immersion "o"
EN 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
EN 60079-7:2003 Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety "e"
EN 60079-7:2007 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 60079-7:2015 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 60079-7:2015/A11:2024 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 60309-1:1992 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1997 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
EN 60309-1:1999 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 1: Yleiset vaatimukset
EN 60309-2:1992 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-2:1998 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
EN 60309-2:1999 Teollisuuskäyttöön tarkoitetut voimapistokytkimet. Osa 2: Mitoitusvaatimukset
EN 60445:2010 Perus- ja turvallisuusperiaatteet ihmisen ja koneen väliselle rajapinnalle, merkinnöille ja tunnistamiselle. Laiteliittimien, johdinpäiden ja johtimien tunnistaminen
EN 60898-1:2019 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
EN 60947-2:2017 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
EN 61140:2016 Suojaus sähköiskulta. Asennusten ja laitteiden yhteiset ominaisuudet
EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
EN IEC 60309-1:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
EN IEC 60309-2:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
EN ISO 10239:2017 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
EN ISO 8846:2017 Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990)
EN ISO 9094:2017 Small craft - Fire protection (ISO 9094:2015)
EN ISO 9094:2022 Small craft - Fire protection (ISO 9094:2022)
HD 60364-7-709:2009 Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations
IEC 60034:201X
IEC 60092-101:1994 Electrical installations in ships - Part 101: Definitions and general requirements
IEC 60092-202:1994 Electrical installations in ships - Partie 202: System design - Protection
IEC 60092-202:1994/A1:1996 Amendment 1 - Electrical installations in ships - Partie 202: System design - Protection
IEC 60092-301:1980 Electrical installations in ships - Part 301: Equipment - Generators and motors
IEC 60092-302:1997 Electrical installations in ships - Part 302: Low-voltage switchgear and controlgear assemblies
IEC 60092-303:1980 Electrical installations in ships - Part 303: Equipment - Transformers for power and lighting
IEC 60092-304:1980 Electrical installations in ships - Part 304: Equipment - Semiconductor convertors
IEC 60092-306:1980 Electrical installations in ships. Part 306: Equipment - Luminaires and accessories
IEC 60092-307:1980 Electrical installations in ships. Part 307: Equipment - Heating and cooking appliances
IEC 60092-350:2001 Electrical installations in ships - Part 350: Shipboard power cables - General construction and test requirements
IEC 60092-352:2005 Electrical installations in ships - Part 352: Choice and installation of electrical cables
IEC 60092-401:1980 Electrical installations in ships - Part 401: Installation and test of completed installation
IEC 60092-501:2013 Electrical installations in ships - Part 501: Special features - Electric propulsion plant
IEC 60146:201X
IEC 60245-4:2011 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
IEC 60332-1:1993
IEC 60332-3-22:2000 Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
IEC 60529:2001
IEC 60533:1999 Electrical and electronic installations in ships - Electromagnetic compatibility
IMO 904E
SOLAS:1974