1.1 Scope of EN 12309 series Appliances covered by this European Standard include one or a combination of the following: ? gas fired sorption chiller; ? gas fired sorption chiller/heater; ? gas fired sorption heat pump. This European Standard applies to appliances only when used for space heating and cooling with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having: ? integral burners under the control of fully automatic burner control systems; ? closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated; ? mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in prEN 12309 1:2012). In the case of packaged units (consisting of several parts), the standard applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard. Installations used for heating and/or cooling of industrial processes are not within the scope of these standards. NOTE All the symbols given in this text are used regardless of the language used. 1.2 Scope of this Part 2 to EN 12309 This part of EN 12309 deals with the safety of gas-driven sorption heat pumps as defined in prEN 12309 1. Only types B12 for outdoor installations, B13 for outdoor installations, B22 for outdoor installations, B23 for outdoor installations, C12 and C13, C32 and C33 are covered in this European Standard.
Tämän julkaisun valmistelusta Suomessa vastaa SFS Suomen Standardit, puh. 09 149 9331.
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1092-1:2007+A1:2013 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1092-1:2007+A1:2013 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
EN 1092-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types
EN 12309-1:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
EN 12309-3:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Test conditions
EN 12309-4:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 4: Test methods
EN 12309-5:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 5: Requirements
EN 1254-2:1998 Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
EN 126:2012 Multifunctional controls for gas burning appliances
EN 14459:2007 Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
EN 1749:2020 Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types)
EN 257:2010 Mechanical thermostats for gas-burning appliances
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 378-2:2008+A2:2012 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 378-3:2008+A1:2012 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 60335-1:2012 Kotitalouksiin ja vastaaviin käyttöihin tarkoitetut sähkölaitteet. Turvallisuus. Osa 1: Yleiset vaatimukset
EN 60335-2-102:2006 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 60529:1991 Sähkölaitteiden kotelointiluokat (IP-koodi)
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
ISO 1182:2010 Reaction to fire tests for products -- Non-combustibility test
ISO 3864-2:2004 Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads -- Part 1: Dimensions, tolerances and designation