Industrial trucks. Safety requirements and verification. Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)
Tuote ladattavissa hetiToimitusaika on noin 1 - 2 työpäivääToimitusaika on 3 - 5 työpäivää.
ISO 3691-1:2011 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks, as defined in ISO 5053: industrial counterbalanced trucks; reach trucks with retractable mast or retractable fork arm carriage; straddle trucks; pallet-stacking trucks; high-lift platform trucks; trucks with elevating operator position up to 1 200 mm; side-loading trucks (one side only); lateral-stacking trucks (both sides), and lateral- and front-stacking trucks; pallet trucks; bidirectional and multidirectional trucks; tractors with a drawbar pull up to and including 20 000 N; rough-terrain, counterbalanced trucks; industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas).
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Sisällysluettelo
Foreward
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
4.1 General
4.2 Starting/moving
4.3 Brakes
4.4 Manual control actuators
4.5 Power systems and accessories
4.6 Systems for lifting and tilting
4.7 Operator positions
4.8 Stability
4.9 Protective devices
4.10 Visibility and lighting
4.11 Environmental conditions
4.12 Devices for towing
5 Verification of safety requirements and/or protective measures
5.1 General
5.2 Structural tests
5.3 Functional verification
6 Information for use
6.1 General
6.2 Instruction handbook
6.3 Marking
Annex A Determination of driving direction and rated capacity (normative)
IEC 60695-11-10 Edition 1.1:2003
ISO 12100:2010 Safety of machinery -- General principles for design -- Risk assessment and risk reduction
ISO 13284:2003 Fork-lift trucks -- Fork-arm extensions and telescopic fork arms -- Technical characteristics and strength requirements
IEC 60695-11-10 Edition 1.1:2003
ISO 12100:2010 Safety of machinery -- General principles for design -- Risk assessment and risk reduction
ISO 13284:2003 Fork-lift trucks -- Fork-arm extensions and telescopic fork arms -- Technical characteristics and strength requirements
ISO 13564-1:2012 Powered industrial trucks -- Test methods for verification of visibility -- Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
ISO 13849-1:2006 Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
ISO 13850:2006 Safety of machinery -- Emergency stop -- Principles for design
ISO 15870:2000 Powered industrial trucks -- Safety signs and hazard pictorials -- General principles
ISO 15871:2000 Industrial trucks -- Specifications for indicator lights for container handling and grappler arm operations
ISO 20898:2008 Industrial trucks -- Electrical requirements
ISO 21281:2005 Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks -- Rules for the construction and layout of pedals
ISO 22915-10:2008 Industrial trucks -- Verification of stability -- Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
ISO 22915-11:2011 Industrial trucks -- Verification of stability -- Part 11: Industrial variable-reach trucks
ISO 22915-1:2008 Industrial trucks -- Verification of stability -- Part 1: General
ISO 22915-20:2008 Industrial trucks -- Verification of stability -- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
ISO 22915-21:2009 Industrial trucks -- Verification of stability -- Part 21: Order-picking trucks with operator position elevating above 1 200 mm
ISO 22915-2:2008 Industrial trucks -- Verification of stability -- Part 2: Counterbalanced trucks with mast
ISO 22915-3:2008 Industrial trucks -- Verification of stability -- Part 3: Reach and straddle trucks
ISO 22915-4:2009 Industrial trucks -- Verification of stability -- Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height
ISO 22915-7:2009 Industrial trucks -- Verification of stability -- Part 7: Bidirectional and multidirectional trucks
ISO 22915-8:2008 Industrial trucks -- Verification of stability -- Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
ISO 2328:2007 Fork-lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions
ISO 2330:2002 Fork-lift trucks -- Fork arms -- Technical characteristics and testing
ISO 24134:2006 Industrial trucks -- Additional requirements for automated functions on trucks
ISO 24135-1:2006 Industrial trucks -- Specifications and test methods for operator restraint systems -- Part 1: Lap-type seat belts
ISO 2867:2006 Earth-moving machinery -- Access systems
ISO 3287:1999 Powered industrial trucks -- Symbols for operator controls and other displays
ISO 3411:2007 Earth-moving machinery -- Physical dimensions of operators and minimum operator space envelope
ISO 3691-3:2016 Industrial trucks -- Safety requirements and verification -- Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
ISO 3691-5:2009 Industrial trucks -- Safety requirements and verification -- Part 5: Pedestrian-propelled trucks
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
ISO 5053:1987 Powered industrial trucks -- Terminology
ISO 6055:2004 Industrial trucks -- Overhead guards -- Specification and testing
ISO 6292:2008 Powered industrial trucks and tractors -- Brake performance and component strength